Mark this thread as Sold
FS: Mathews VA Garage Sale (even though I don't have a garage)
#1
Registered User
Thread Starter
FS: Mathews VA Garage Sale (even though I don't have a garage)
Name: David
Location: Mathews VA
Contact: PM
This is the thread where I sell off all my extra parts.
AP1 metal grille insert. $50.
Rubber edging, steel insert for the AP1 bumper hole. I wire brushed the metal and repainted it. Chewed up the rubber in some spots where I got overeager with the brush, but that's mostly on one side.
Defroster harnesses and button bank for MY 2000 vin below 5730. Check the date on your door sill. If your car was not built in 1999, this probably won't work in it.
32204-S2A-A00 and 32205-S2A-H00
$75
OEM leather-wrapped knob $20. It's not as scratchy as it looks in the pics. Other two knobs are sold.
SRS airbag harness for 00-05. Worked when I took it out of the car. $25
77961-S2A-G00
Location: Mathews VA
Contact: PM
This is the thread where I sell off all my extra parts.
AP1 metal grille insert. $50.
Rubber edging, steel insert for the AP1 bumper hole. I wire brushed the metal and repainted it. Chewed up the rubber in some spots where I got overeager with the brush, but that's mostly on one side.
Defroster harnesses and button bank for MY 2000 vin below 5730. Check the date on your door sill. If your car was not built in 1999, this probably won't work in it.
32204-S2A-A00 and 32205-S2A-H00
$75
OEM leather-wrapped knob $20. It's not as scratchy as it looks in the pics. Other two knobs are sold.
SRS airbag harness for 00-05. Worked when I took it out of the car. $25
77961-S2A-G00
#2
Registered User
Thread Starter
**********
SOLD stuff here:
Front heat shield
sold for $100
Side heat shield
sold for $100
Spoon front X brace. Has a small rust spot or two. I'll probably just repaint them.
Sold for $120
Password JDM carbon fiber intake and modified Coastal Metals cooling plate.
Sold for $600.
Asura 3" dual exhaust, round tips. I painted the canisters matte black (not flat, not gloss).
Sold for $750.
Rick's stainless steel header. A few of the bolts for the heat shields broke, so I drilled them out and retapped the holes.
Sold for $175.
Gendron 1 inch *solid* fsb front sway bar. This thing is a beast.
Sold for $400.
GT Motoring alcantara slipcover for the '00-01 center tunnel. This will fit over the carpet, and you can kinda make it work over the leather cover but not well.
Sold for $30
Full CR tonneau conversion parts. Everything you need: the tonneau itself, two side filler panels for when the hardtop is off, three rear rails, two side plates to mount the hardtop side catchers, two brackets to replace the hardtop bumper brackets, and three bolts plus a cover plate to secure the tonneau itself.
Sold for $725
Moddiction short shifter. The stock shifter doesn't feel long until you put this in, then it's like a truck. The short shifter has a rubber ring or something starting to pop out of the shifter body, but it doesn't hurt anything.
Sold for $125
Bride RO (?) seat rails
Sold for $220.
These don't have any Bride stickers, so I can't promise they are actual Brides. They certainly look like it, and came off a set of Spoon seats that are recovered Brides.
Custom-valved single-adjustable Konis.
Sold for $750.
These were revalved by ProParts to a spec developed for B-stock autocross. Even if you don't do autox, these are awesome on the street. Aside from the usual shitty Koni paint, everything is intact. No stripped threads. Includes tophats, spring perches, Koni bumpstops, and hardware.
#s 04407, 04408, 04409, and 04410
Muteki black open lugs. Some surface rust, but entirely usable. The socket has no cracks or splits.
Sold for $20.
USDM pale yellow corner diffusers. These started out clear but didn't stay that way. $10.
Stock USDM amber corner diffusers. $10
Random box of Honda parts. Mostly clips and small bolts, but there is a defroster button and a plastic panel in there. Sold for $12.
OEM tophats. Sold for $35
Shift knobs. Mugen aluminum 'dildo' and OEM titanium knobs. Sold for $60.
Alcantara shift boot. Sold for $15.
SOLD stuff here:
Front heat shield
sold for $100
Side heat shield
sold for $100
Spoon front X brace. Has a small rust spot or two. I'll probably just repaint them.
Sold for $120
Password JDM carbon fiber intake and modified Coastal Metals cooling plate.
Sold for $600.
Asura 3" dual exhaust, round tips. I painted the canisters matte black (not flat, not gloss).
Sold for $750.
Rick's stainless steel header. A few of the bolts for the heat shields broke, so I drilled them out and retapped the holes.
Sold for $175.
Gendron 1 inch *solid* fsb front sway bar. This thing is a beast.
Sold for $400.
GT Motoring alcantara slipcover for the '00-01 center tunnel. This will fit over the carpet, and you can kinda make it work over the leather cover but not well.
Sold for $30
Full CR tonneau conversion parts. Everything you need: the tonneau itself, two side filler panels for when the hardtop is off, three rear rails, two side plates to mount the hardtop side catchers, two brackets to replace the hardtop bumper brackets, and three bolts plus a cover plate to secure the tonneau itself.
Sold for $725
Moddiction short shifter. The stock shifter doesn't feel long until you put this in, then it's like a truck. The short shifter has a rubber ring or something starting to pop out of the shifter body, but it doesn't hurt anything.
Sold for $125
Bride RO (?) seat rails
Sold for $220.
These don't have any Bride stickers, so I can't promise they are actual Brides. They certainly look like it, and came off a set of Spoon seats that are recovered Brides.
Custom-valved single-adjustable Konis.
Sold for $750.
These were revalved by ProParts to a spec developed for B-stock autocross. Even if you don't do autox, these are awesome on the street. Aside from the usual shitty Koni paint, everything is intact. No stripped threads. Includes tophats, spring perches, Koni bumpstops, and hardware.
#s 04407, 04408, 04409, and 04410
Muteki black open lugs. Some surface rust, but entirely usable. The socket has no cracks or splits.
Sold for $20.
USDM pale yellow corner diffusers. These started out clear but didn't stay that way. $10.
Stock USDM amber corner diffusers. $10
Random box of Honda parts. Mostly clips and small bolts, but there is a defroster button and a plastic panel in there. Sold for $12.
OEM tophats. Sold for $35
Shift knobs. Mugen aluminum 'dildo' and OEM titanium knobs. Sold for $60.
Alcantara shift boot. Sold for $15.
Trending Topics
#8
Hey David, I want the side heat shield. Pm me with paypal info, I take care of it in the morning.
I have an uncle that lives in Mathews. I spent a couple years in the Woods Cross Rds. area as a teenager - Gloucester High...
I have an uncle that lives in Mathews. I spent a couple years in the Woods Cross Rds. area as a teenager - Gloucester High...