|
FS: NY: Moving on/Part-out Garage Sale - Continuous updates
First Name: Dan
Price: Multiple listed below Location: Lake George area, NY. Contact: PM & Email (ninety6yenko@aol.com) Ramey built 3" dual exhaust that bolts to the stock 3-bolt flange - $400 EPS module - $75 Ramey Built exhaust: 3" dual exhaust. Does not have a resonator and uses straight through magnaflow mufflers. I was an immediate lean condition switching to this from a Invidia N1 on my turbo setup. Needed to add 7-8% fuel across the board. has a flat spot in it where it hangs low by the axle from bottoming out. http://i64.tinypic.com/iqwo3t.jpg http://i65.tinypic.com/29ql729.jpg http://i64.tinypic.com/ivh3ir.jpg http://i67.tinypic.com/fyiwep.jpg http://i63.tinypic.com/2qj9iye.jpg EPS Module: unknown year/mileage. I bought it off Ebay two years ago to troubleshoot an EPS issue. Ended up being the torque sensor pigtail was melted, so I did not need this. worked 100%. http://i66.tinypic.com/n1s0sl.jpg http://i65.tinypic.com/2e0sl0n.jpg |
SOLD parts:
AP2 Headlights: 8/10 condition. No broken tabs, all bulbs and sockets intact. Comes with Bulbs, ballasts and igniters. Heat stress marks in lenses on top, minor enough that they cannot be seen in pictures. http://i66.tinypic.com/2cn485.jpg http://i67.tinypic.com/2hqgh04.jpg http://i63.tinypic.com/28jz1hv.jpg http://i63.tinypic.com/2reslso.jpg AP2 Center console: 9/10 condition. Drilled a small hole in the console for the Ap1 Alarm signal light. Light does not come with console. Superficial scratches on the slide portion. no cracks or digs. http://i68.tinypic.com/123pky9.jpg http://i68.tinypic.com/bhy73c.jpg Guardian Designs center console cover: 10/10 condition. Very thick and padded, Red stitching. http://i67.tinypic.com/2z8qfk3.jpg Guardian Designs steering wheel: 8/10 condition. M3 thickness, flat bottom, red stitching. Driver side corner of flat bottom has scrapes in leather from getting in and out of the car. http://i64.tinypic.com/qod4i0.jpg http://i67.tinypic.com/oh7rlw.jpg http://i68.tinypic.com/wrfhtu.jpg http://i66.tinypic.com/kcm2o1.jpg http://i68.tinypic.com/23haurs.jpg DC5 ITR steering wheel back plate: 10/10 condition. This is a back plate off of a DC5R. they do not have cruise control, so it eliminates the switches on the steering wheel without leaving a hole. http://i63.tinypic.com/8z2r6q.jpg http://i63.tinypic.com/zj8abs.jpg ID1Ks: About 20KMI on them running 93 Pump Gas. never had E85 through them. Ran them at 88-91% Duty cycle on 45PSI base pressure at highest boost. http://i64.tinypic.com/pxflj.jpg http://i64.tinypic.com/s30y6b.jpg http://i64.tinypic.com/2e5nztk.jpg Radium Fuel Rail: About 20KMI. Older design, the "print" on it is different than current design. Comes with 6AN adapter, the ~3 feet of PTFE 6AN hose and adapter for fuel hardline (not pictured). http://i66.tinypic.com/1zd9hw.jpg http://i64.tinypic.com/2reib81.jpg http://i65.tinypic.com/2zggmqx.jpg Mishimoto Oil cooler kit: About 20KMI. Excellent condition. Brackets modified to fit the cooler closer to the A/C condenser, behind an intercooler rather right in the front bumper. the Mishimotot supplied hoses are brand new and untouched, I used home made hoses to reach a relocated Oil filter. http://i67.tinypic.com/fmno9.jpg http://i64.tinypic.com/24w6c0p.jpg http://i67.tinypic.com/3344vna.jpg AEM FPR: About 20KMI. Comes with all 3 pills, Never saw base fuel pressure above 45PSI. http://i65.tinypic.com/jawahg.jpg Radium Fuel Pressure Gauge: About 20KMI on it. Comes with a 6AN adapter/extension. http://i63.tinypic.com/243kcv8.jpg http://i67.tinypic.com/123pkrq.jpg Radium Dual Catch Can setup: About 20KMI. 7/10 condition. AP2 dual catch can setup. I had it on my AP1 with the cruise control relocated. It is currently setup to be used as a closed system, but can be used as an open system as well. The black anodized has started to come off of it in areas. http://i63.tinypic.com/24lvs4o.jpg http://i67.tinypic.com/2ptvscl.jpg http://i65.tinypic.com/wtufrr.jpg http://i64.tinypic.com/24qinah.jpg http://i65.tinypic.com/4l0ina.jpg http://i68.tinypic.com/2pp0gvn.jpg http://i67.tinypic.com/2s1okte.jpg http://i63.tinypic.com/2a00v81.jpg Custom Oil Filter Relocation: This moves the Oil Filter to the Cross Beam. The Relocation block has 2 NPT fittings/plugs on the "Dirty" (Feed) side of the oil flow - ideal for Pressure Sensor or Temp sensor. I also have an Adapter with an NPT fitting/plug on the "Clean" (Return) side of the oil flow for a Turbo Oil feed. http://i65.tinypic.com/971he1.jpg http://i68.tinypic.com/206bod1.jpg http://i67.tinypic.com/33o5zzb.jpg Radium Fuel Surge Tank: Has about 20kmi on it. It needs a return system to work correctly, so it is for an AP1 or a converted AP2. Has a Walbro 450 E85 pump in the housing, it has never seen E85 and never seen base fuel pressure above 45PSI. Maxed out my ID1ks without issue. http://i68.tinypic.com/2z9fq4k.jpg http://i65.tinypic.com/xazb6r.jpg http://i63.tinypic.com/3482ezl.jpg http://i68.tinypic.com/aau43m.jpg http://i67.tinypic.com/2z87trq.jpg http://i65.tinypic.com/2ywydtv.jpg SOS Radio gauge Pod: Owned for less than 2 months, no defects. http://i65.tinypic.com/ormlvs.jpg http://i65.tinypic.com/2hyfdsl.jpg Hasport Motor Mounts: 70A inserts, about 20kmi on them. Good condition. http://i63.tinypic.com/11cck5u.jpg http://i64.tinypic.com/2f0ax51.jpg http://i65.tinypic.com/2wr1cpk.jpg Hasport Diff Mounts: 70A inserts, about 20kmi on them. Good condition. http://i66.tinypic.com/69i0ee.jpg http://i67.tinypic.com/mtrqcz.jpg http://i66.tinypic.com/2ahe329.jpg OEM NFR hardtop: OEM hardtop in NFR. OEM Honda glass tinted 35%, and has defroster cable on window side. Comes with all OEM hardware to attach it to your car. http://i66.tinypic.com/2ykz95h.jpg http://i68.tinypic.com/vx0zk.jpg http://i68.tinypic.com/2vvwcc2.jpg http://i64.tinypic.com/4rcfh4.jpg http://i66.tinypic.com/2jdkfvo.jpg http://i64.tinypic.com/j6skcn.jpg Fortune Auto 500s: Excellent condition. No leaks, no stripped parts or seized parts. Includes spanner wrenches. About 10KMI. http://i64.tinypic.com/no7k3q.jpg http://i67.tinypic.com/1zyk8zs.jpg http://i65.tinypic.com/w7dcp1.jpg http://i65.tinypic.com/24ql7pj.jpg Knight Coolant expansion kit: About 20KMI. Very good condition minus some minor water spotting. http://i64.tinypic.com/n2ire8.jpg http://i65.tinypic.com/atups4.jpg AP1 Intake Manifold: Powdercoated black, Inlet bored out to 65-66mm. Comes with IAT and ECT sensors. http://i63.tinypic.com/mrb52c.jpg http://i67.tinypic.com/2dkwhle.jpg http://i64.tinypic.com/23lijvc.jpg http://i65.tinypic.com/2ntis2g.jpg http://i66.tinypic.com/2z5kjg6.jpg Mishimoto Slim Fan kit: About 20KMI on it. Very good condition. Fans & Shroud. Shroud back side was powdercoated black. http://i65.tinypic.com/14tn8jn.jpg http://i64.tinypic.com/2j1tq8p.jpg Axial Flow Short Shifter: Excellent condition. http://i68.tinypic.com/2ywz31h.jpg http://i67.tinypic.com/e01r94.jpg OEM Pump Hanger: Housing for an OEM fuel pump. never used. I decided to go with a surge tank instead. Not sure what these go for, $100 is arbitrary. http://i64.tinypic.com/91f0ch.jpg http://i63.tinypic.com/6og7dt.jpg Mishimoto Radiator: About 20KMI on it. Very good condition minor some water spotting. Comes with the Mishimoto radiator cap & 160* fan switch. http://i65.tinypic.com/4py0qr.jpg http://i66.tinypic.com/11qk4rp.jpg http://i64.tinypic.com/dqg46b.jpg Cooling Plate: Free for anyone that buys the full radiator setup locally. Not worth shipping. http://i68.tinypic.com/nyd6jl.jpg Invidia N1 exhaust: Decent condition, flanges are square, no cracks. http://i64.tinypic.com/116uru9.jpg http://i66.tinypic.com/20za737.jpg http://i64.tinypic.com/2hpknwz.jpg RSX Wideband: PN# 234-9005. Bought it to wire into Kpro and decided to wire in my Innovate MTX-L instead. has about 10KMI on it. http://i67.tinypic.com/4u9xqp.jpg http://i63.tinypic.com/v955z.jpg Innovate MTX-L, MTX-D & SOS Dual gauge pod: Wideband gauge using Bosch 4.9 LSU sensor. About 10KMI, replaced an AEM EUGO failsafe. Oil Pressure & Temperature gauge. About 10KMI on it, replaced just an oil temperature gauge. Both work great Gauge pod Comes with OEM A-Pillar mounted behind it. Free if both gauges above are purchased at asking price. Will also include wiring and the fuse blocks that tie into underdash fuse box. http://i66.tinypic.com/2a9o2oj.jpg http://i64.tinypic.com/ivy54x.jpg http://i66.tinypic.com/2yvj8l4.jpg http://i65.tinypic.com/2afgca9.jpg http://i63.tinypic.com/250ht7k.jpg http://i64.tinypic.com/256hgfp.jpg |
reserved 2
|
reserved 3
|
Guardian designs center console tunnel cover sold!
|
Headlights, Steering wheel, ITR backplate and Center console all SOLD!
|
New parts added
|
Bump
|
Great seller. Buy with confidence.
|
Originally Posted by Midnightdennis
(Post 24523566)
Great seller. Buy with confidence.
Thank you! oil cooler sold as well! |
| All times are GMT -8. The time now is 11:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands