daniel_ap1

got my turbo kit up for sale
here
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...87944822&rd=1,1

Full Race pro street manifold
Full Race T67 H.0.
Tial 44mm wastegate
3 inch custom downpipe "exhaust work will need to be done to hook it up to a catback system"
Spearco 36x10.5x3.5 Front mount intercooler with custom endtanks
2.5 inch aluminum intercooler piping
Tial 50mm blow off valve
High temp silcone "Hump" hose couplings
Full race 3-2.5 inch reducer coupling
Full race 90 degree coupling
ALL couplings come with T bolt clamps
extra hump hose coupling and some extra t bolt clamps
Ultimate racing oil filter relocation block adapter
B&M oil cooler
B&M oil filter adapter with -10 lines
Turbo Oil Feed line
Turbo oil return line
Oil pan return fitting
Turbo inlet fitting for oil feed
4 inch intake tube
4 inch K&N air filter
Ebay oil catch can
Krank Vents
AEM EMS 1052
AEM extension harness to relocate behind seat etc
AEM 6-1 uego gauge "can be wired into ems to datalog like a 1052U version"
2 wide band oxygen sensors one used one new
AEM 3.5 bar map sensor
Gm Boost solenoid
ECT gauge fix from modify.com
AEM wide band gauge
Apexi EL2 Boost gauge
RC 750cc injectors
Wallboro 255 fuel pump
Battery relocation kit "no battery included"
Heat shield
Heat wrap

full race kit new goes for 5,700 and you have to wait weeks for it to get here and it doesnt come with aem ems, uego setup, 3.5 bar map, gm boost solenoid, injectors, gauges, battery relocation, etc

if your a s2ki member and buy it let me know and there will be no shipping charge

also have the aluminum mounting brakets for the diff off a 03 s2k with 12k on them
retail for around 40 each looking to get 35 shipped for all 3

1052U uego harness no oxygen sensor 20 shipped

s2k11

How many miles on the kit?

daniel_ap1

right at 3000 miles
had it on the car for about 2months
the map in the aem is good enough to get to a tuner but i wouldnt trust it to boost on i was running a 3mm headgasket and no 2 vehicles are the same
can provide more pictures of anyting you guys want

daniel_ap1

also running version 1.19

Dsgs2k3

good luck with the sale

lilaznboi903

nice.. any dyno charts?

daniel_ap1

car made 462 at 17psi with a inline pro 3mm headgasket
i'll give my tuner a call and see if he still has them on his computer

GrandMasterKhan

I would LOVE to see some dyno sheets.

What would be required to fit this on an AP2?

daniel_ap1

there wouldnt be a difference everything will basically be the same but you will spool the turbo a little faster

daniel_ap1

all pm's replied