Mark this thread as Unsold
GA AP1 AP2 Crankshafts - rods - sleeved block- valve covers ect.
#1
Thread Starter
GA AP1 AP2 Crankshafts - rods - sleeved block- valve covers ect.
First Name: Chris
Price: Listed below
Location: Calhoun, GA
Contact: PM or email - Charper732@gmail.com
Doing a garage clean out and selling a ton of stuff ive been collecting for awhile - parts are used unless otherwise specified as NEW
Two F22c Crankshafts Both are in MINT condition - never cut - Neither show any measurable out-of-round when measured with a micrometer
First one is stock -SOLD
Second one has been micro polished and dynamically balanced. - $850
F20c crankshaft - mint condition, never cut with no measurable out-of-round - $500
Mahle gold pistons - ran for a very short period of time, pistons are in excellent condition with only the coating worn slightly at the bottom - no measurable difference in the piston skirt - will include brand new CP wrist pins - $250
Valve covers - $100
Can powder coat any color and add -10 an fittings for additional cost
NEW TL-S Brembo conversion- bolt on and go, no modification necessary - $650
ARP head studs $100
NEW F22c Skunk2 alpha series rods w/ arp2000 bolts- $250
Sleeved F20 block - one cylinder is damaged - will bore it out if buyer requests - $800
ACT streetlite flywheel resurfaced and ready to go -$200
KW springs, got these is a parts lot - they are labeled 456lb - $Make offer
S2000 4.10 rear gears - no idea what the history is, they appear to be in extremely good condition- $ Make offer
The second one has been micro polished and dynamically balanced.
Price: Listed below
Location: Calhoun, GA
Contact: PM or email - Charper732@gmail.com
Doing a garage clean out and selling a ton of stuff ive been collecting for awhile - parts are used unless otherwise specified as NEW
Two F22c Crankshafts Both are in MINT condition - never cut - Neither show any measurable out-of-round when measured with a micrometer
First one is stock -SOLD
Second one has been micro polished and dynamically balanced. - $850
F20c crankshaft - mint condition, never cut with no measurable out-of-round - $500
Mahle gold pistons - ran for a very short period of time, pistons are in excellent condition with only the coating worn slightly at the bottom - no measurable difference in the piston skirt - will include brand new CP wrist pins - $250
Valve covers - $100
Can powder coat any color and add -10 an fittings for additional cost
NEW TL-S Brembo conversion- bolt on and go, no modification necessary - $650
ARP head studs $100
NEW F22c Skunk2 alpha series rods w/ arp2000 bolts- $250
Sleeved F20 block - one cylinder is damaged - will bore it out if buyer requests - $800
ACT streetlite flywheel resurfaced and ready to go -$200
KW springs, got these is a parts lot - they are labeled 456lb - $Make offer
S2000 4.10 rear gears - no idea what the history is, they appear to be in extremely good condition- $ Make offer
The second one has been micro polished and dynamically balanced.
Last edited by Charper732; 06-19-2018 at 03:36 PM.
#3
Thread Starter
#5
Thread Starter
Thread
Thread Starter
Forum
Replies
Last Post