moon knight

First Name: Jeff
Price: See below. Shipping and 3% paypal fees to be paid by buyer.
Shipping for items below will be by USPS parcel (approximately 3-6 weeks, boat then truck, insurance is included) or for extra, USPS priority (about 5 business days). Oversized items will be based on dimensional weight. Shipping is for the Continental U.S and outer islands of Hawaii (except Oahu). Shipping runs high due to my location in Hawaii.
Location: Honolulu, HI
Contact: PM
Reason for selling: Sold Car. No longer need parts. Parts were either installed or going to go in a 2002 AP1 (00-03). Don't have the time for working on cars.

Thread is updated as items are sold. Items sold will be lined out and marked as SOLD.

- Brand New OEM Honda Wheel Hub Assembly, Bearing, and 84mm Circlip. Part Numbers are below. All sealed in their original packaging. Was going to use to replace a loud, screeching, defective rear wheel bearing but sold car before replacing it. Bearing is separate from the Hub and not pressed together. Applicable to the Honda S2000 from 2000-2009. Made in Japan.
42210-S2A-000 REAR HUB ASSEMBLY, RR., MSRP $141.79
44300-S84-A02 BEARING ASSEMBLY, FRONT HUB (NSK), MSRP $84.28, (Also Applies to Prelude, Accord, CR-V Element)
90681-SG0-000 CIRCLIP (INNER) (84MM), MSRP $10.99, (Also Applies to Prelude, Accord, CR-V Element)
$200/obo + shipping ($20 priority/tracking/insurance)

- Overhead spring compressor tool (new unused). Requires modification to use on s2000.
$15/obo

-OEM s2000 Air Dam Guide with snorkel cut out.
$30/obo + shipping ($20 priority/tracking/insurance, Goes by dimensional weight due to size)

-OEM Genuine Honda Shifter/Change Lever Insulator Foam. Part No. 74699-S2A-000. New unopened. Fits 00-09 AP1 and AP2. Old Foam get brittle and falls apart when removing for shifter maintenance.
$30/obo+ shipping ($10 first class/tracking/insurance)

-FSID Innovation 20 Piece, Neon Chrome, Gold Bottom aluminum wheel protection, 7 sided/Heptagon, Security, 60 degree Cone, Lug Nuts 12X1.5. Lugs nuts are stamped 12x1.5. Comes with key for the lugs. Lug nuts are new and have not been used. There are no tool marks on the lug nuts and in great condition.
Fits: Acura, Honda, Toyota, Scion, Lexus, Mazda and many other brands. Verify fitment before purchase.
This was an extra set for my Honda s2000.
Pitch Thread: 12 x 1.5 X 31.1
Material: FORGED Steel
Bottom: Aluminum for Wheel Protection
Weighing at approximately 33 grams each
Lugs are 20mm wide at the base
Oversized and taper seat to ensure best contact.
Comes with 20 pieces locking lug nuts and 1 lock key.
$30/obo + $10 shipping

-Also have the following AP1 OEM/stock miscellaneous engine parts if needed (rocker arm assemblies, valves, and springs). All parts have some carbon deposits. Mileage of parts are unknown.

SOLD-Seibon carbon fiber TF (s2000 Club Racer CR Replica) Spoiler/Wing with set of carbon fiber stands, fasteners, hardware, custom aluminum mounting plates. Upper surface vinyl wrapped in black to prevent/protect from clouding/hazing. Hardware will include OEM Honda CR trunk stiffener parts/rubber/bumpers to keep trunk from warping at speed and (1) OEM CR trunk spring to lift the trunk with spoiler. Non-CR springs are too weak to lift up the trunk and spoiler and 2 CR trunk springs will knock you in the chin due to the lighter carbon fiber spoiler than OEM CR spoiler. Spoiler is unmounted. All you have to do is figure out where to drill holes and attach the spoiler.
$600/obo. Local Pick Up. May consider shipping if enough interest. SOLD

SOLD-2 pc (1 pair) CE28 Volk Racing Rims, authentic/genuine, lightest wheels for s2000 competition racing. Hard to find specs. No bends, fixes, or cracks. Small curb on 1 rim about 1/2" long and very slight that can't be seen unless closely viewed and hard to capture in pics. Black rims has black spray paint and not a great spray job with paint runs. Bought used that way. No center caps. Just some removed paint from from tire mounting/dismounting. s2000 safe offset for rear. No fender rolling required for rear. If going lowered with wide tires, need minor fender rolling. Great for autoX or shoving meaty tires on the wheels due to the offsets.
Bolt Pattern: 5x114.3
Rear: 17x9, +54 offset
$700 + shipping ($160 priority/tracking/insurance, Goes by dimensional weight due to size) + paypal SOLD

SOLD bare cylinder head SOLD
SOLD-Gendron (Small Fortune Racing) Tow Hitch with fixed tongue (no receiver), complete with hardware. Aluminum portions with hardware meant to stay on car (with the hitch removed) are approximately 6 lbs. A lot less than the chase race hitch. Removable part containing the ball is steel and has slight cosmetic rust along with the hardware. Aluminum parts were spray painted black to blend in with tow hitch portion already painted black. Some of the black spray paint has rubbed off. Contains all mounting hardware as seen in pictures. Requires drilling of 2 holes.
$160/obo + shipping ($67 priority/tracking/insurance, Goes by dimensional weight due to size) SOLD

SOLD Honda s2000 OEM side strakes with lower rubber pieces. Sebring silver. Does not come with most of mounting hardware. Has the template/guide for drilling holes if desired to fasten to car body. Mounted on my car without the lower rubbers. Only mounted with tape and a few screws to the wheel well (no drilling). Will mount well just with fresh adhesive after old remnants removed. Paint has been rubbed off in parts and rock chips show on the lower parts.
$260 shipped + 3% paypal fees.SOLD

SOLD-OEM Genuine Honda AP2 intake retainers (8 pieces PN 14765-PRB-A01) and intake keepers (16 pieces PN 14781-PCX-004).
$60 for all retainers and keepers + shipping ($5 first class/tracking/insurance). SOLD

-SOLD OEM Genuine Honda AP1 Left/Right (Driver/Passenger) Headlights. No repairs. All tabs intacts. No cracks. No leaks. Looks great. Came from a 2002 Honda s2000. No bulbs/ballasts or wiring. Existing bulbs/ballasts can be transferred over. Everything seen in the pictures are included. Fits all 00-03 s2000 Ap1 and possibly AP2, but verify fitment.
$450/obo + shipping ($80 priority/tracking/insurance, Goes by dimensional weight due to size). SOLD

SOLD-New unused Forbidden-USA Hardtop Door Seals. Works on both OEM style and Mugen Style Tops. Has stiffener at the corner to prevent kinks at the bend. 1 set (pair).
$55/obo + shipping ($10 priority/tracking/insurance, Goes by dimensional weight due to size) SOLD

-SOLD Honda s2000 OEM cam towers/cradle/girdle/caps, upper and lower full set. Removed from an AP1 but also fits 2004-2005 AP2. However, check/verify fitment. No cracks and intact. Complete 10 piece set including bolts removed from the same cylinder head. Comes with everything seen in the pictures with all the bolts and dowels used for mounting. It is recommended a set from one head be used. Mixing and matching within the 10 piece set from more than 1 head (vice 10 piece set from 1 head) greatly increases the potential for cracking. These parts are not sold by Honda separately from the cylinder head except for the bolts.
Head Cover Bolt A/B Part No. 90011-PCX-004 / 90012-PCX-004.
Dowel Pins (10X16) 94301-10160.
$200/obo + shipping ($20 priority/tracking/insurance) SOLD

-COMING SOON






















Attachment 156477

DS2k02

Are there only 2 Volks?

moon knight

Only two. Clarified post.

roel03

Are you including the retainer tool? If so, PM me.

s2krevie13

id totally buy the CR wing trunk reinforcement hardware if you would let it go

moon knight

Added strakes

DarthS2K85

The price you have listed for your headlights, is that for one or the set? Thanks.

moon knight

It is for both (right and left / passenger and driver)

S2GARAGENYC

willing to split up the headlights?

moon knight

Depending on the offer, I could do that.