Mark this thread as Unsold
TN - STR Partout: Moton / Berk / J's / etc.
#1
Thread Starter
Join Date: Jun 2012
Location: Knoxville, TN
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
TN - STR Partout: Moton / Berk / J's / etc.
First Name: Jed
Price: See below (buyer pays any shipment)
Location: Knoxville, TN
Contact: PM
Moton Motorsports 2 way remotes - 850F / 700R Hyperco Springs / Spherical top mounts / Helpers -$3000 Sold
> These are a step up from the clubsports; offer a wider range of adjustment.
> One of the fronts has seen swaybar contact from the owner before me. Evidently Moton was contacted and said it wasn't a problem. I've never had an issue with it either.
PLM Header -$200 Sold
Berk Cat - $100 +$50 Shipment
> Cracked, but rewelded with no issue. Tested with no leaks.
J's Titanium single exit 70mm - $400 +$350 Shipment
> Tip is not perfectly round, I've straightened it after spinning into a cone.
> A new, thicker flange was installed after I cracked the original. I had large holes put into the flange in case the new flange wasn't precisely placed where the old one was cut off.
> Fit is wonky at the cat since the new flange was not put in exactly the same place. The tip still sits in the normal spot no problem.
> Two dents along the tubing.
> I found a crack in the resonator bracing after taking it off the car.
K&N FIPK -$175 +$100 Shipment Sold
> Includes all hardware needed to mount & hose for '08-'09 model install.
> Includes a custom carbon box the last owner made. Weighs a fraction of the original steel box weight.
Price: See below (buyer pays any shipment)
Location: Knoxville, TN
Contact: PM
Moton Motorsports 2 way remotes - 850F / 700R Hyperco Springs / Spherical top mounts / Helpers -
> These are a step up from the clubsports; offer a wider range of adjustment.
> One of the fronts has seen swaybar contact from the owner before me. Evidently Moton was contacted and said it wasn't a problem. I've never had an issue with it either.
PLM Header -
Berk Cat - $100 +$50 Shipment
> Cracked, but rewelded with no issue. Tested with no leaks.
J's Titanium single exit 70mm - $400 +$350 Shipment
> Tip is not perfectly round, I've straightened it after spinning into a cone.
> A new, thicker flange was installed after I cracked the original. I had large holes put into the flange in case the new flange wasn't precisely placed where the old one was cut off.
> Fit is wonky at the cat since the new flange was not put in exactly the same place. The tip still sits in the normal spot no problem.
> Two dents along the tubing.
> I found a crack in the resonator bracing after taking it off the car.
K&N FIPK -
> Includes all hardware needed to mount & hose for '08-'09 model install.
> Includes a custom carbon box the last owner made. Weighs a fraction of the original steel box weight.
Last edited by jdpeterson21; 07-08-2019 at 02:05 PM.
#4
Thread Starter
Join Date: Jun 2012
Location: Knoxville, TN
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Header is sold. Updated with some example shipment pricing to furthest point in the lower 48 (Seattle) since I had some requests for quotes. If the actual shipment comes back cheaper, I'll refund the difference.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
akrilic
Member S2000 Classifieds and For Sale
7
05-23-2017 11:02 AM
Lex
Member S2000 Classifieds and For Sale
13
10-23-2015 06:44 AM
jaundice
Member S2000 Classifieds and For Sale
24
07-29-2010 06:26 AM
jaundice
Forced Induction For Sale
5
07-29-2010 06:24 AM