Mark this thread as Unsold
FS: Part out thread - Mugen MF10's, Endless BBK, Bride seat + More
#1
Member
Spotter
Spotter
Thread Starter
FS: Part out thread - Mugen MF10's, Endless BBK, Bride seat + More
Location: Somerville, MA
Contact: PM me here, or text at 781-TwoNine six - 66 three four
Comptech titanium front strut bar - Price: $240 USD
To my knowledge the only bar that will fit a supercharger. Has a thinner portion where the intake meets the throttle body
(Discontinued so no link)
Endless BBK - 6pot (324X30) - Price: $2700 USD with BNIB MX72 pads and almost brand new rotors (300 miles on them)
Basically brand new rotors, used pads on the kit right now + a brand new set of pads - spirited street/track oriented pad (MX72)
The kit brand new is $4370USD and I paid 1300$ US just for the new rotors and pads (to give you an idea of what this kit costs)
Bride GiasII Sport - Limited edition with red stitch with bride seat rails - Price 1000 USD
Have the original box plus papers that came with this from Tracy Motorsports.
Seat was 2100$ USD new + 240 USD for the rails
Mugen MF10's 17x8 + 17x8.5 wrapped in brand new RE71rs (300 miles on tires) - Price 3500$
I have a brand new spare 17x8 MF10 which I'll add for another 500$
Mugen V3 steering wheel with NSX-R horn and Works hub - Price $500 USD
UKDM Cluster for AP2 - Price $400
Has something around 55K miles on it. This can be reprogrammed by a dealer to your current dash mileage
Mugen Copper clutch kit (Clutch, PP, flywheel, TO bearing combo)
Price: $650
Kit has probably around 5-10K miles on it. Can't really have any more than that given my car didn't have a ton of miles on it in the first place.
Contact: PM me here, or text at 781-TwoNine six - 66 three four
Comptech titanium front strut bar - Price: $240 USD
To my knowledge the only bar that will fit a supercharger. Has a thinner portion where the intake meets the throttle body
(Discontinued so no link)
Endless BBK - 6pot (324X30) - Price: $2700 USD with BNIB MX72 pads and almost brand new rotors (300 miles on them)
Basically brand new rotors, used pads on the kit right now + a brand new set of pads - spirited street/track oriented pad (MX72)
The kit brand new is $4370USD and I paid 1300$ US just for the new rotors and pads (to give you an idea of what this kit costs)
Bride GiasII Sport - Limited edition with red stitch with bride seat rails - Price 1000 USD
Have the original box plus papers that came with this from Tracy Motorsports.
Seat was 2100$ USD new + 240 USD for the rails
Mugen MF10's 17x8 + 17x8.5 wrapped in brand new RE71rs (300 miles on tires) - Price 3500$
I have a brand new spare 17x8 MF10 which I'll add for another 500$
Mugen V3 steering wheel with NSX-R horn and Works hub - Price $500 USD
UKDM Cluster for AP2 - Price $400
Has something around 55K miles on it. This can be reprogrammed by a dealer to your current dash mileage
Mugen Copper clutch kit (Clutch, PP, flywheel, TO bearing combo)
Price: $650
Kit has probably around 5-10K miles on it. Can't really have any more than that given my car didn't have a ton of miles on it in the first place.
Last edited by kryptonite; 03-15-2018 at 07:19 AM.
#3
Member
Spotter
Spotter
Thread Starter
Uploaded a couple I had. There's some metal tape on two of the high points because they were almost touching the stock hood at those points, and the previous owner added that to avoid damage to the bar. I don't mind the look and have a big roll of it to replace if it does wear.
The following users liked this post:
Oneloveknk (03-16-2018)
Thread
Thread Starter
Forum
Replies
Last Post
kryptonite
Southern Ontario For Sale
6
09-18-2018 08:01 PM