Looking for PO
#11
Thread Starter
#12
#13
The transmission plate is on the passenger side, just where it connects to the engine.
#14
Thread Starter
I managed to find the transmission plate guys I have an AP2 tranny. As for the engine plate I haven't bothered looking for it, but I know for sure the valve cover is F20C. Do I need a mirror or something of the like in order to see the engine plate?
#15
Takes a boat load of effort to swap AP1 and AP2 engines 'cuz you need sensors, ECU, etc. Gearbox swap is basically some bolts.
VIN shows what engine should be in the car as does the tachometer.
-- Chuck
VIN shows what engine should be in the car as does the tachometer.
-- Chuck
#16
Thread Starter
I'll have to take a look to see if PO just swapped the valve cover but the valve cover is 100% an F20's.
#17
Community Organizer
Welcome to the boards
What year is that car? I dont know the owner, never seen that car before and I'm from the area. Dealer can't tell you anything unless one of the techs is a big s2000 fan or owns one.
If that's an AP1 car, he did a lot of work to make it look like an AP2.
How many miles?
What year is that car? I dont know the owner, never seen that car before and I'm from the area. Dealer can't tell you anything unless one of the techs is a big s2000 fan or owns one.
If that's an AP1 car, he did a lot of work to make it look like an AP2.
How many miles?
#18
Thread Starter
Welcome to the boards
What year is that car? I dont know the owner, never seen that car before and I'm from the area. Dealer can't tell you anything unless one of the techs is a big s2000 fan or owns one.
If that's an AP1 car, he did a lot of work to make it look like an AP2.
How many miles?
What year is that car? I dont know the owner, never seen that car before and I'm from the area. Dealer can't tell you anything unless one of the techs is a big s2000 fan or owns one.
If that's an AP1 car, he did a lot of work to make it look like an AP2.
How many miles?
#19
Thread Starter
So far I have identified mishimoto rad, c.f. cowl, c.f. tower brace, greddy dual exhaust, ap1 motor, some aftermarket intake, and custom sound system. Don't think there's much more, but I would definitely like to know if there is. Also I'm not so sure what's up with the fuel rail it doesn't have the FPR where I'm used to seeing it.
#20
If you post the engine serial number someone here will be able to tell you what year the engine is out of. Same for the VIN which has some more data in it that shows, for example, the plant (pre '06 for sure), and Canadian or USDM (these cars are known to cross the border).
-- Chuck
-- Chuck
Thread
Thread Starter
Forum
Replies
Last Post