New coilovers, alignment question
10-31-2017, 06:32 AM
#1
Thread Starter
Join Date: Oct 2014
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
New coilovers, alignment question
I am a complete noob when it comes to alignment specs. I have a completely stock AP1. Recently got HKS Hipermaxx SP coilovers and Volk RE30, 17x7.5 +50 and 17x9 +63 in rear. The car isn't going to be tracked, just drove on nice days. What alignment specs should I have the shop use? The car will not be slammed, Lowered possibly an inch or so. Thanks!
10-31-2017, 07:02 AM
#2
front camber -1 to -2 degrees
front toe zero to 0.1 degrees toe-IN
5.5 - 6.5 degrees (some think more = always better, I prefer to run very little)
rear camber -1.5 to -2.5 degrees
rear toe 0.2 to 0.3 degrees toe-IN (avoid the infamous UK spec which calls for 1/4" or 0.6 degrees of toe, this will kill your tire life and make handling sketchy a.f.)
front toe zero to 0.1 degrees toe-IN
5.5 - 6.5 degrees (some think more = always better, I prefer to run very little)
rear camber -1.5 to -2.5 degrees
rear toe 0.2 to 0.3 degrees toe-IN (avoid the infamous UK spec which calls for 1/4" or 0.6 degrees of toe, this will kill your tire life and make handling sketchy a.f.)
Thread
Thread Starter
Forum
Replies
Last Post
KillerBlackbird
S2000 Brakes and Suspension
4
02-28-2012 12:16 PM
