EuroBoutique

Yes these wheels DO fit every model s2000, the CR wheel is not specific in nature besides the stitching. Ours have the sport grip (thicker) and have numerous options so you can pretty much get a custom wheel.

see this thread:
https://www.s2ki.com/s2000/topic/107...#entry23095710

EuroBoutique

here's another sample (thicker grip, OEM flat bottom wheel) :

EuroBoutique

Just re-visiting this subject, we've sold quite a few wheels to CR owners but not for the group buy.

Anyone here interested in getting a replacement thicker grip CR style steering wheel? You can even keep your stock CR wheel for safe keeping if desired. Let us know what configuration/specs you think would be the best for CR owners!

We have the ability to do a smaller diameter OEM s2000 wheel for your CR without giving up any of the stock wheel features so you could retain your airbag, cruise control, horn, etc...

Vanishing Point

Nice work.

EuroBoutique

It was brought to our attention that some you may not know we have done quite a few CR steering wheels in the past, take a look at this thread:

https://www.s2ki.com/s2000/topic/107...#entry23095710


Keep in mind we can use ANY combination of materials to build you the ultimate "CR" steering wheel so options are endless. Thicker grip and flat bottom are key added features of our wheels and they are 100% OEM plug/play since they are essentially OEM steering wheels.

EuroBoutique

One of our custom "CR" edition carbon steering wheels in a client's car!

Happy Friday

EuroBoutique

Besides steering wheels we also make really trick interior Carbon Fiber parts. Each one is hand made to OEM spec and we guarantee perfect fitment.

here's a photo of our gauge cluster surround a fellow CR owner sent to us after installation:

Mocky

This in yellow stitching is really appealing to me... I just would have to get a donor steering wheel so I can do this while keeping my original one.

jetguy

What is the diameter compared to oem?

EuroBoutique

All the builds you see above are same diameter as OEM, it changes only slightly with the thicker robust grip. When adding a flat bottom or flat top, those areas will slightly decrease the diameter on those sides only.

We do have the ability to build a 20mm SMALLER diameter wheel at special request.

We do this right now for the NSX community since the stock NSX wheel as you know is very large (nearly 380mm)

here's a sample of a standard NSX wheel next to a smaller diameter: