CR wheels
 

I was thinking of going non staggered but keeping the stock CR look as buying two wheels would be hecka cheaper than buying a whole new set
http://www.aaapart.com/image/ALY63941U30.jpg
I found these wheels and it says they are:
"The alloy wheels are OEM wheels from dealer takeoff or unused insurance allocations."
http://www.aaapart.com/index.php?rou...duct_id=347414

they match the Honda part number for the CR rear wheels 42700-S2A-A61 and are almost $500 bucks cheaper
bad thing is I have no idea if the OEM wheel color

The offsets are also 65mm and the center bore is 64.1mm
so I would have to get 10mm spacers and bore it out to 70.1mm to make everything work right?

any opinions/suggestions
thanks in advance
https://i101.photobucket.com/albums/.../bluethumb.gif

I think I would.

Actually, you have me thinking now...

Hmm. I have always liked the slight concave look of the rears. What is the total price per wheel?

$179/wheel $25/wheel shipping $204 total (plus tax if you live in Texas).

Whoa that is pretty cool! There are some local places in AZ that can bore the wheels out for me. I hope someone buys these soon and can be the guinea pig :) I could see myself buying two wheels and mounting some 255's on there for track use and canyon drives...

They might not actually have them in stock. I think sites like that basically keep a database of wheels that come through and post them up. If someone orders it, they gather them up from various sources (scrap yards etc.). Basically, you'll be buying someone totalled CR's wheels (probably refinished). This is just a guess since I've seen sites like those offering the Zanardi NSX wheels (only 50 zanardi NSX's were released to the public. The wheels are essentially BBS RGRS).

I <3 my RG-Rs.

http://www.vividracing.com/catalog/w...3-p-48096.html

These are calling my name :(

Wait, I think I remember reading that the CR wheels don't have the recessed portion to accommodate spacers smaller than 20mm.

OP can just get 10mm spacer without studs and then press in extended studs. Correct me if I'm wrong, but if the OP puts a 10mm spacer on the front with OEM rear S2K wheels won't the front track be wider than the rear? (assuming the OP isn't going to run a 10mm spacer on the rear too)