Which Perm Live shall I use?
Evening. I’ve been installing a Kenwood KSC-SW11 powered Sub in my car today. All done with exception of the main power lead. It’s not a big piece of liquorice as usual amps, as actually it doesn’t draw too much and runs a 10 amp fuse. It is fairly thick though. Too thick to splice on to the HU harness I’d say. Where is best to hook it up inside the car? I was thinking fuse box somewhere. Don’t fancy going through the bulkhead and in to the engine bay for the battery really. Ideally don’t want to destroy factory wiring either. |
Places in the fuse board under dash
https://www.s2ki.com/forums/s2000-un...lenoid-951029/ |
Originally Posted by noodels
(Post 24515866)
Places in the fuse board under dash
https://www.s2ki.com/forums/s2000-un...lenoid-951029/ I presume that nice meaty accesory port would be more than up to the task of running my little powered sub. |
Its what its there for :thumbup:
|
Originally Posted by noodels
(Post 24515877)
Its what its there for :thumbup:
Thank you for your response, it’s really saved me some aggravation, as I’ve already run the leads and have the live to the fuse box region. |
pps put an inline fuse in
|
All times are GMT -8. The time now is 10:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands