Boost comp on series 2 vs series 1
#1
Boost comp on series 2 vs series 1
Hi. I originally tuned my s2k on steady state however I don't have access to a dyno at moment so im going to just boost comp the fueling while street tuning.
On the series 1 box you would adjust the throttle inj modifier after setting up raw values and the fuel comp however I don't see that in series 2.
I can see that series 2 has boost fuel trim and microsec/bit is under the "tps fuel"
Anyone have a simple run down for a full boost comp map on series 2 or have a basic cal I can take a quick look at ?
On the series 1 box you would adjust the throttle inj modifier after setting up raw values and the fuel comp however I don't see that in series 2.
I can see that series 2 has boost fuel trim and microsec/bit is under the "tps fuel"
Anyone have a simple run down for a full boost comp map on series 2 or have a basic cal I can take a quick look at ?
Thread
Thread Starter
Forum
Replies
Last Post
Whitelightning
S2000 Under The Hood
1
05-16-2002 07:20 PM