Aftercooler swap
10-18-2017, 10:25 AM
#1
Thread Starter
Join Date: Aug 2012
Location: Halifax NS
Posts: 74
Likes: 0
Received 0 Likes
on
0 Posts
Aftercooler swap
Anyone ever tried an SOS after cooler on the Vortech kit, or vice versa? I really like the mount, size, and position of the SOS after cooler better than my vortech. The way my lines are run for my after cooler doesn't leave a lot of room for a bigger aftermarket rad. The SOS one has plenty. Just curious if its been done.
10-20-2017, 02:54 PM
#2
Join Date: Oct 2008
Location: Bay Area, California
Posts: 6,765
Likes: 0
Received 2 Likes
on
2 Posts
Anyone ever tried an SOS after cooler on the Vortech kit, or vice versa? I really like the mount, size, and position of the SOS after cooler better than my vortech. The way my lines are run for my after cooler doesn't leave a lot of room for a bigger aftermarket rad. The SOS one has plenty. Just curious if its been done.
10-31-2017, 02:40 PM
#4
Join Date: Oct 2008
Location: Bay Area, California
Posts: 6,765
Likes: 0
Received 2 Likes
on
2 Posts
So i was very curious about this setup and emailed SOS. They advised that their aftercoolers are specifically only for their SOS sc. It wasnt as expensive as a new vortech aftercooler, which runs about 1100-1200, but not sure if you want to take the risk of it not seating correctly
10-31-2017, 10:34 PM
#5
Registered User
Mate, I have a brand new Paxton 1500 "Ti" which is the 1200's big brother and a Vortech Aftercooler, both are brightly polished. I have a Tial QRJ BOV and Greddy Flange.
I have other stuff like Custom Pulleys from ASP racing. It's the same set-up Phil "SIDEWAYS" has. Let me know if you need anything.
Cheers
I have other stuff like Custom Pulleys from ASP racing. It's the same set-up Phil "SIDEWAYS" has. Let me know if you need anything.
Cheers
Thread
Thread Starter
Forum
Replies
Last Post