I've got the full race manifold here and im trying to put together the oil lines. Does anyone know what fitting's are needed for the feed and how many feet of stainless is needed for the feed and how much is needed for the return? Thanks!

 

talk to reborn56, but if i were you, i would mock it up myself on the car and just measure it from there... presuming you run the oil line from the oil relocator kit, and install a oil return in the girdle, the oil inlet can't be more than 1.5 feet, and the return about 6-8 inches... but do the measurements for yourself too!

 

Thanks!
Im going to buy the oil relocation kit from inline pro.