Ok, I'm curious after a slight error occured with my setup in reguards to turbo selection and power output. What turbo are you F22C guys running (include specs i.e. inducer,exducer, a/r etc.) and what power levels are you putting down @ xxpsi and xx:1 compression ratio? This is just a poll thread I'm making, seeing as how the majority of turbo s2k's are AP1 to see if AP2 guys are doing things any different for power.

Also, feel free to post any other relevant supporting mods (i.e. injector size, EMS used, any internals, etc.)

Thanks.

 

b/c there were some other stupid questions that came up.

 

GT35R

Mods are in that link in my sig.

 

whats your a/r on the GT35?

 

.82

 

Someone please slap me for this post, I had no idea what I was talking about apparently.

 

 

GT3076R 0.82 a/r
443 whp and 363 lb-ft @ 16 psi dropping to 10 by redline
9.5:1 compression, Pauter rods, Arias Pistons, GE HD sleeves
AEM 1012 EMS tuned by me
Dyno charts in my gallery
100% custom kit

Tim

 

what is the max you can go on that setup boost wise? and for your custom manifold is if a tublar or is it a cast iron manifold?

 

Mine is tubular. I have gone up to 16 psi on pump gas. I do not know what the max boost pressure I could hit is.

Tim