DIY Tuning for the AEM EMS Series II
#23
Open up the program twice. Have the old version on left and on the right rescale the load and rpm map. Then copy rows from old one to new one that line up with rpm/load. Do this for as many as you can than have aem calc the missing values. Then drive around an tweak from there. Do this for both timing and fuel. It's not that bad. I didn't want my map to go to 10500 rpm and I didn't want 35 psi as max load. Now it's 9k and 25 psi
Thread
Thread Starter
Forum
Replies
Last Post