Grams, AEM or Walbro Fuel Pump for SC Build - Which is Preferred?
11-22-2018, 09:34 PM
#51
Thread Starter
You can run an aftermarket pump without a tune. Your fpr should keep the same fuel pressure anyways. I can't hear my Walbro over my exhaust anyways. And with the top down you definitely cannot hear it.
The only time you hear it is if you are in traffic with the top up and the radio off.
The only time you hear it is if you are in traffic with the top up and the radio off.
@flanders copy that (the wiring)
@Kyle thanks.
12-17-2018, 11:01 PM
#52
Thread Starter
FYI: I got to hear a Walbro 255 in action thanks to Deckoz and Kyle. It didn't sound abnormally loud at all (during start-up or while running). This could mean that some people have gotten deceived by Chinese knock-offs which make a lot of noise.
12-20-2018, 05:38 AM
#53
My car is very quiet at idle, and my 255 is inaudible
12-20-2018, 09:04 PM
#54
Thread Starter
12-20-2018, 09:15 PM
#55
https://www.ebay.com/itm/High-Pressu...5.c10#viTabs_0
That $22 WALLBORU yo.
12-20-2018, 11:20 PM
#56
Thread Starter
Yeah the difference in sound between the descriptions and some of the youtube videos I've seen is crazy....I'd imagine most folks take to ebay without knowing better.
https://www.ebay.com/itm/High-Pressu...5.c10#viTabs_0
That $22 WALLBORU yo.
https://www.ebay.com/itm/High-Pressu...5.c10#viTabs_0
That $22 WALLBORU yo.
Thread
Thread Starter
Forum
Replies
Last Post
johninator
S2000 Forced Induction
10
01-31-2005 07:49 PM
