Pic request: J's front fenders with 18x10 +35 wheels
#1
Pic request: J's front fenders with 18x10 +35 wheels
Hey guys, I'm looking for some pictures of s2000s with J's front fenders and 18x10 +35 wheels (or really close to it). Preferably 255/35 or 265/35 tires but anything works really. Want to see how it fits with the wheel and different tire sizes. Please let me know what the spec's are when posting. Thank you so much in advance!
#2
Those offsets and wheel size on the J's fenders will look sunken in a bit.
I'm running Spoon Front Fenders (20mm) and ASM rear overs (25mm) with 18x10 +39 w/265's and my fronts are flush but my rears are sunken in a bit. The J's fenders are 35mm front and 40mm rear so you could potentially run 18x10 +24 fronts and 18x10 +10 rears (unless you want to run higher offset with wider rims).
I'm running Spoon Front Fenders (20mm) and ASM rear overs (25mm) with 18x10 +39 w/265's and my fronts are flush but my rears are sunken in a bit. The J's fenders are 35mm front and 40mm rear so you could potentially run 18x10 +24 fronts and 18x10 +10 rears (unless you want to run higher offset with wider rims).
The following users liked this post:
sams2kap1 (10-21-2017)
#4
Thanks for the reply man! So I am doing a square setup with the 18x10 +35. I have j's front fenders and asm rear overfenders. I was worried about the front fenders being too aggressive for the wheels and it being sunken in but after searching a lot (through s2ki and google), I thought that it should look about right especially with a meatier 265/35 tire.
#5
Thought this may give an idea... this is 18x10 +35 square setup with 255/35/18 tires. Running -3 camber all around. Asm fenders front and rear. With js fenders your fronts may sink in a bit with this setup. 265s may fill it a bit more. Ive run 18x9.5 +27 nt03s with js fronts and they were a bit sunken but its kind of a lose lose if you are set on js fronts and asm rears and you want a square set up. Hope this helps!
The following users liked this post:
sams2kap1 (11-17-2017)
#6
Registered User
Here is a J's Fender with an 18x10 +40 wheel but with a 25mm spacer (so effectively +15). The tire is a 255/35 Falken FK453 and -3º camber.
Hope this helps!
Hope this helps!
The following users liked this post:
sams2kap1 (11-17-2017)
Thread
Thread Starter
Forum
Replies
Last Post
xplizitremix
The S2000 Gallery
9
08-02-2011 01:58 PM