Prototype 1 piece CR Ap2 bumper w/ brake ducts made out of Polyurethane
#1
Former Sponsor
Thread Starter
Prototype 1 piece CR Ap2 bumper w/ brake ducts made out of Polyurethane
Been cooking up a front bumper for our S2000 to make life simpler for a splitter, brake ducts and no broken grill problems that OEM has. Bumper is made out of high quality polyurethane for flexibility and durability. I'm tired of FRP bumpers cracking every time you go up a drive way. So we tried to stick with the OEM durability and look but just a little improved. This is for those who want a good clean upgrade without having to buy an expensive OEM lip new or Ap2 bumper for those with Ap1 cars. Then catering to track guys who want to add a splitter without having a gap in the middle the way OEM CR lips contour up in the center. Too boot we added screw in brake ducts.
UPDATED PHOTOS!! 6/22/17
Here you go!! Our customer just mounted the new One Piece Polyurethane CR Style Bumper!! He had it professionally wrapped and we couldn't be happier on the fitment! The bumper features integrated Grille, 3 inch brake ducts, Shaved license plate holes and tow hook hole. Flat center bottom for splitter friendly.
The painted yellow bumper is an original OEM CR Lip and Ap2 Bumper
OEM
Ballade
Notice how we added more material in the center to make the lip flat on the bottom.
Note: OEM front grills are not part of the bumper, they are a separate grill you have to mount in and the tabs always break leaving it flapping around. Our grill is a little thicker but molded as part of the bumper. This was extremely hard for our manufacturer to do this, but we got it looking pretty good. Even left a spot for the front plate bracket.
OEM bumper bracket retained.
Brake Ducts
Removable duct if you don't want to use them.
OEM weight if anyone cares to know.
Our bumper came in a few ounces lighter
Bottom of our bumper versus stock
UPDATED PHOTOS!! 6/22/17
Here you go!! Our customer just mounted the new One Piece Polyurethane CR Style Bumper!! He had it professionally wrapped and we couldn't be happier on the fitment! The bumper features integrated Grille, 3 inch brake ducts, Shaved license plate holes and tow hook hole. Flat center bottom for splitter friendly.
The painted yellow bumper is an original OEM CR Lip and Ap2 Bumper
OEM
Ballade
Notice how we added more material in the center to make the lip flat on the bottom.
Note: OEM front grills are not part of the bumper, they are a separate grill you have to mount in and the tabs always break leaving it flapping around. Our grill is a little thicker but molded as part of the bumper. This was extremely hard for our manufacturer to do this, but we got it looking pretty good. Even left a spot for the front plate bracket.
OEM bumper bracket retained.
Brake Ducts
Removable duct if you don't want to use them.
OEM weight if anyone cares to know.
Our bumper came in a few ounces lighter
Bottom of our bumper versus stock
Last edited by BalladeSports; 06-26-2017 at 09:38 AM.
#3
That looks great! Curious to see the price
Trending Topics
#9