When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
9.5 +38 using J's rear over fenders will look VERY sunk they're +40mm wider than stock. The Spoon over fenders are +25mm and the 9.5 +38 will look ok, just a tad sunk imo.
BTW you can fit 17x9.5 +38 with OEM rear quarters with a roll and slightly pulled fenders and OEM front fenders pulled. This is my old set up with 255/40 Dunlop Z2 and -3 camber all around
Well the J's +35mm will look sunk, the Spoon +20mm will be ok fitment wise. imo just stick with OEM and pull them.
Nah I wanted the fronts and be able to go back to oem if I wanted. But I might just stick to stock pulled metal. Thanks for the pic! that helped with some visualization.
9.5 +38 using J's rear over fenders will look VERY sunk they're +40mm wider than stock. The Spoon over fenders are +25mm and the 9.5 +38 will look ok, just a tad sunk imo.
BTW you can fit 17x9.5 +38 with OEM rear quarters with a roll and slightly pulled fenders and OEM front fenders pulled. This is my old set up with 255/40 Dunlop Z2 and -3 camber all around
07-20-2018, 01:12 PM
Spoon Fenders + OEM quarter panels Pic Request
