kyle.claxton

Hey g0g3tt4, do you have any pictures of the tan seat covers? I am thinking about purchasing a pair, but have yet to see how they match up with the tan interior!

hecash

Following in the hopes that an old post may still yield a result on the OEM tan match to the Clazzio beige.

alSpeed2k

Following in the hopes that an old post may still yield a result on the OEM tan match to the Clazzio beige.
[/quote]

There's some Black and Tan one's pictured in this thread.

From the thread I linked to:

rokkerkory

How hard was it to install your covers? any issues?

fullbackS2

Getting the seats out was probably the hardest part. HINT: Pick up some furniture stuffing to place under any areas (particularly around the bolsters) that do not seem full enough. The results speak for themselves. Most people are very surprised when they learn that they are just seat covers. Looks very factory like.

estpalley

I installed them last Saturday. It took about 2 hours and the only struggles I had was pulling the material through the seat between the bottom of the setback and rear of the bottom cushion. The red seats with red interior seemed a bit much, so I went with the black seats with red stitching. I'm pretty happy with the result.

Hfreak

Damn that is a ton of red, nice way to break it up.

8kJoy

Just curious, will these seat covers actually help prevent creases from the seats ? Do they last? As this thread started in 2012 so someone must have had these for quite sometimes now.

sam_spider

I bought some back in 09 and they were fine up until I put Recaros in a couple years back. I haven't checked under the covers to see how the seats have held up but I'd guess they should be fine, at least they shouldn't have the typical bolster wear. I hope.

8kJoy

I was thinking the covers would probably protect from scratch, fading ,UV damage and what not, but it should not prevent the seats from wrinkling or crease up right? As the pressure is still there when you sit on them.