goy091

Well finally got most of the parts I was looking for together and felt I should post it up to let people see how it looks and give other ideas on what they'd like to do to their interiors as well.

List of mods:
S2X carbon gauge cluster trim
OEM DC5R Momo wheel with stock 06 airbag (not sure if the JDM DC5R airbag would work)
JPM Coachworks Shift boot, red stich w/black leather (asked Joe to use more pebbled leather to match my 06 seats)
JPM Coachworks e-brake, red stitch w/black leather, black alcantara near the button
JPM Coachworks elbow pad, red stitch, black leather outer, black alcantara inner
JPM Coachworks knee pads, black leather outer, black alcantara center (can't see it in these pics)
Team Voodoo countersunk shift knob. The coating was getting gross so I scrubbed it off with steel wool
Panavise universal mount
Proclip iPhone 3GS holder (works ok with the 4/4S)
Blitzsafe iPhone/iPod adapter
OEM Honda floormats, black with red stitching

Let me know what you guys think. Looking to possibly replace my worn out mats with the EZ Motoring ones.

zeroptzero

That looks great. Nice choice on the wheel, it fits in really well. The JPM parts are perfect too.

midnightmethane

any better shots of the e-brake cover...i wanna see closer and better angle pics

zeroptzero

One thing I like about the JPM e-brake leather covering is the little nub of alcantara that they use around the button edge, it's a nice little touch where it meets up with the black leather. I've got one done in black solid leather with blue stitching. They feel nice.

midnightmethane

post pics of yours

zeroptzero

I don't want to thread-jack but you can see it in my post that I had up a few weeks back in this forum, my pics aren't that great but you can get an idea of the way it looks. My setup is a black and blue theme.

https://www.s2ki.com/s2000/topic/939...nterior-added/

Lucky-R

Beautiful job man...wondering if that jdm dc5R wheel will fit my AP1 also? Did u get it brand new? Looks awesome, not all worn down like used ones on ebay...

S2k007

Yeah, that wheel looks great. Where did you get it from? How much? Is it compatible with an AP1 and AP1 center air bag?

goy091

Hey guys thanks for the comments.

JFUSION don't need to worry about thread jacking. Just posted up to give people ideas on what they can do with their interiors.

I got the part from an Acura dealer. You can actually get the JDM wheel/grip from any Acura dealership. 78501-S6M-R71ZB that's the part number. It should work on any S2000. I just swapped over the plastics, horn and airbag from my 06. Everything bolts right up. The frame of the wheel is exactly the same. It's also the same as thie EP3 Si and the RSX.

I'll try to post of more pics of the e-brake. Just got finished putting on a new soft top. Two full days and lots of swearing but it looks good lol.

zeroptzero

What's a steering wheel like that worth ?, getting an oem wheel re-covered isn't cheap, but I would think a new wheel from Honda / Acura would be a pretty penny. They look awesome though, it looks like really nice leather too.