R00567

i saw this on the asm blog and other JDM s2000's



i have seen a couple members also do the similar setup on US cars using the JDM bezel

what is exactly involved in setting up a US dash with the JDM bezel to get it to look flush? i understand you have to cut your dash but is there anything else involved in brackets or stuff of that nature to make it work? could owners that have done this successfully chime in on some wisdom?

lol i have a suzuka dash and i dont think i have a high margin of error

thanks again

aphex4000

You might want to take a look in the dash cutters thread and also post there for more info. These guys have pretty much implemented every variation of the in-dash LCD possible.

S2KI - Dash cutting club

MBHs2k

Pwjd sells the bezel for like 80 bucks so of can have a navi installed. But then you'll have too cut a hole in the dash to fit it in.

R00567

will the bezel fit for a US dash or will it look funny?

aphex4000

The OEM JDM bezel sold by retailers will need to be shaped with a heat gun since they are only made for RHD models.

PUNCHIN-IT

Here is my setup.

My link

Moddiction

A guy down in florida did a bunch of really nice in dash installs for a bunch of people. Really wish I had him do mine when I lived down there. Looks by far the best I have seen. Actually looked oem.

R00567

broski do you think i can get his contact info? i would drive down there just to have it look OEM ^_^

Moddiction

Can't remember his screen name but if you look in the thread Dash cutters or something like that should be able to find him.

Moddiction

Just found him actually in the link above.

Jdmcrave is his screen name.


https://www.s2ki.com/s2000/topic/142.../page__st__275