CR Steering Rack Stiffener Alternatives
02-21-2011, 09:48 AM
#1
CR Steering Rack Stiffener Alternatives
Is there an alternative to the CR steering rack stiffener? Is it even worth getting? My '06 has a CR steering rack w/o the stiffeners and Im thinking of putting them in. Any help is appreciated!
02-21-2011, 11:28 AM
#3
Registered User
Join Date: Aug 2004
Location: Aliso Viejo
Posts: 969
Likes: 0
Received 0 Likes
on
0 Posts
If you search you will find that this topic has been discussed a number of times in the past. It turns out there is little to no benefit. Some people claim (mostly AP1 owners) that they feel a slight different, but most indicate that they don't feel a difference at all.
02-21-2011, 12:57 PM
#4
Originally Posted by NoBottleJustThrottle,Feb 21 2011, 04:28 PM
If you search you will find that this topic has been discussed a number of times in the past. It turns out there is little to no benefit. Some people claim (mostly AP1 owners) that they feel a slight different, but most indicate that they don't feel a difference at all.
02-21-2011, 01:16 PM
#6
Originally Posted by Swift GT,Feb 21 2011, 05:59 PM
What was necessary to fit the car with the CR rack? Is it a very noticeable difference in ratio?
06-24-2011, 09:58 AM
#7
Registered User
Join Date: May 2011
Posts: 287
Likes: 0
Received 0 Likes
on
0 Posts
HI! Do the c/r rack is a direct fit? I will install ap1 rack on my ap2 monday with the torque sensor and i dont find direct response if it can be a direct swap except an s2k member that fit ap2 rack on ap2
Trending Topics
06-24-2011, 11:46 AM
#9
HI! Do the c/r rack is a direct fit? I will install ap1 rack on my ap2 monday with the torque sensor and i dont find direct response if it can be a direct swap except an s2k member that fit ap2 rack on ap2
Originally Posted by iLuveketchup' timestamp='1298314081' post='20289049
Is there an alternative to the CR steering rack stiffener? Is it even worth getting? My '06 has a CR steering rack w/o the stiffeners and Im thinking of putting them in. Any help is appreciated!
06-25-2011, 01:31 PM
#10
The CR stiffener is not a bushing or bushing kit. It's a Bar that goes across the gap in the steering rack mount. It connects similiar to how a strut tower bar connects two shock towers, except it's the two spaces on the steering rack. The Steering rack bushings are for improved steering feel/feedback but don't offer anything else.
It's a $23 part from Honda. The ASM bar and S2X bars look like they tie into the steering rack as well. So the S2X bar is a tower bar and steering stiffener in one.
It's a $23 part from Honda. The ASM bar and S2X bars look like they tie into the steering rack as well. So the S2X bar is a tower bar and steering stiffener in one.
Thread
Thread Starter
Forum
Replies
Last Post