Current AP1 "OEM style" front lip solutions?
Has anyone recently purchased and installed an OEM style lip on their AP1? Trying to determine the best vendor to purchase one from. I heard some good things about BaysonR, but unfortunately they're not in stock and the only response I can get from CS is "It shows out of stock with no ETA, and they've been out of stock for some time" Kinda sucks considering theirs supposedly fit the best, and they'd have a decent market if they decided to continue making them...really unfortunate.
Finding an OEM lip at this point is going to be a nightmare, especially at a decent price, and to be completely honest I'd much prefer a poly lip vs the fiberglass they used for OEM as this car will be getting driven and roads are pretty hostile here in the Northeast. Basically just trying to figure out where people are getting their lips from in this current day, how they fit, etc. I have the OEM installation hardware kit and weather seal to alleviate some of the not-so-perfect fit, just need a good lip. |
I'd also like to know. I'm in the market for a new one. Want something with spot on fitment and not a heavyweight item either.
|
Originally Posted by RolanTHUNDER
(Post 24497020)
I'd also like to know. I'm in the market for a new one. Want something with spot on fitment and not a heavyweight item either.
https://www.octanemotorsports.com/20...SABEgIV2_D_BwE Comes out to $155 shipped, but they offer a pre-paint option as well as "fitment & quality guaranteed". I tend to look for ads like this that seem to be well composed as opposed to fly-by-night ebay vendors. You can only charge so much for poly but fitment adds a price. I highly doubt they'd be looking to refund $300+ if someone opted for the pre-painted version and it fit like shit. Maybe I'll bite the bullet soon and give this a test run, if it blows I'll just get a refund. |
^^^^Looks promising, be sure to give a report if you decide to get one. I may be looking for a replacement too.
Levi |
Originally Posted by S2kys
(Post 24497037)
Doing some google searching I'm inclined to give this place a go.
https://www.octanemotorsports.com/20...SABEgIV2_D_BwE Comes out to $155 shipped, but they offer a pre-paint option as well as "fitment & quality guaranteed". I tend to look for ads like this that seem to be well composed as opposed to fly-by-night ebay vendors. You can only charge so much for poly but fitment adds a price. I highly doubt they'd be looking to refund $300+ if someone opted for the pre-painted version and it fit like shit. Maybe I'll bite the bullet soon and give this a test run, if it blows I'll just get a refund. |
Yeah that seems pricey and it is probably the same lip as any ebay vendor will sell you. For ebay vendors I would look for one that ship the lip in a box where the lip doesn't have to be folded up. If none state that in the description I would ask before buying. It is possible to get them to go back into the right shape but it is better if they aren't all twisted up and crammed in a small box. For paint I wouldn't pay to have it painted by the seller I would take it to a body shop so they can actually paint match it to your bumper.
|
all of the replica lips will look like shit, I purchased a BaysonR, had it painted and installed professionally and within hours ripped it off and literally threw it in a garbage can. I eventually found an OEM lip and it was worth every last penny.
secondly, the OEM lip is ABS plastic. |
BaysonR was shipping their lips without bending them to a certain extent, they would wrap the lip in cardboard and tape everything down. I bought 3 from them and had almost no fitment issues, had to heat one with a hair dryer to reform a slight bend.
Good luck in your search and report back for future lip seekers. :tipwink: Here is my current BaysonR AP2 lip. https://cimg4.ibsrv.net/gimg/www.s2k...56fd97c180.jpg |
Seibon 2x2 carbon fiber AP1 lip part # FL0003HDS2K-OE is another option. It's not cheap though. PM me for a dealer referral, to get the lowest price in the US on Seibon parts.
|
Originally Posted by jackmugen02
(Post 24497429)
Seibon 2x2 carbon fiber AP1 lip part # FL0003HDS2K-OE is another option. It's not cheap though. PM me for a dealer referral, to get the lowest price in the US on Seibon parts.
|
All times are GMT -8. The time now is 04:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands