EZ Lip Splitter
7 Attachment(s)
Hello to all! :tipwink:
I wanted to try the EZ Lip universal splitter on the s2000. I had seen maybe one photo of it somewhere. The material is a flexible rubber that conforms to your bumper, or lip. The adhesive is 3M. I personally wanted a lip protector for my oem lip. With the car being lowered and all, scrapes will happen from time to time underneath. As you can see in one of my photos. I used alcohol to wipe under the lip(or bumper) scissors to cut excess trim. simple. www.ezlip.com Attachment 106640 Attachment 106641 scrape on lip Attachment 106642 before Attachment 106643 after Attachment 106644 Attachment 106645 Attachment 106646 |
I like it! Looks better than the Home Depot garage door option. How tough is the rubber? Do you think it'll hold up ok over time?
|
rubber seems great and flexible, since its 3m adhesive, it should hold up well. You could also go even further and use screws if you wanted to. But for me 3m should hold just fine.
|
Interesting.. I wonder how the sides would look?
|
plywood seems the way to go... stiff, easy to cut, cheap, and proven.
|
thats just homedepot garage door bottom sealer with 3m double sided tape added to it.... trust me i know, i work doing home improvements and so forth.... clever idea though!
|
honestly if you are scraping already, i would assume you would probably scrape this off anyways?
|
30 bucks for 7.5 feet..... i payed like 15 bucks for 30 feet at home depot.... and 3 bucks for the 3m tape.
|
Originally Posted by chViETnk
(Post 21364871)
honestly if you are scraping already, i would assume you would probably scrape this off anyways?
|
Originally Posted by CLEANs2000
(Post 21364961)
30 bucks for 7.5 feet..... i payed like 15 bucks for 30 feet at home depot.... and 3 bucks for the 3m tape.
happy to pay the extra $10-12 to have someone make it for me, and delivered to my doorstep. Some people like to pay over $300 for an apr splitter. Others like to do their own replica for hardly much. I totally understand your point. |
Nice. I think I still plan on going with the Coastal Metals splitter, but this is a very affordable alternative!
|
I've always thought these were interesting. Wonder if it'd look any good on a mugen lip...
|
Just ordered for my car.
|
Originally Posted by Timedeye
(Post 21365172)
Originally Posted by CLEANs2000' timestamp='1327925443' post='21364961
30 bucks for 7.5 feet..... i payed like 15 bucks for 30 feet at home depot.... and 3 bucks for the 3m tape.
|
Originally Posted by Rubn1out4GudLuk
(Post 21370060)
Just ordered for my car.
|
Originally Posted by Timedeye
(Post 21371156)
Originally Posted by Rubn1out4GudLuk' timestamp='1328035592' post='21370060
Just ordered for my car.
Sorry about the neg rep, that was me :( tried to like the comment but my phone lagged and chose the neg rep instead. Can't change it either. :( |
Originally Posted by Rubn1out4GudLuk
(Post 21371516)
Sorry about the neg rep, that was me :(
tried to like the comment but my phone lagged and chose the neg rep instead. Can't change it either. :( |
Originally Posted by Mark355
(Post 21371545)
Originally Posted by Rubn1out4GudLuk' timestamp='1328061991' post='21371516
Sorry about the neg rep, that was me :(
tried to like the comment but my phone lagged and chose the neg rep instead. Can't change it either. :( Back to topic |
[/quote]...Some people like a functional "splitter", you're right. What you installed will split nothing and have no aerodynamic effect.
[/quote] Maybe EZ Lip did some heavy R&D and engineered progressive deflection into the material allowing an angle change at speed resulting in higher negative under-car pressure for reduced lift. In any case, it still looks better than my naked OEM bumper. |
Originally Posted by daktruckie99
(Post 21370565)
Originally Posted by Timedeye' timestamp='1327932116' post='21365172
[quote name='CLEANs2000' timestamp='1327925443' post='21364961']
[/quote] I'm not against a " functional splitter"! My point was some people are willing to buy a apr splitter for over 300 bucks and have it delivered to their front door, Others like to take the task of DIY. Their is nothing wrong with either or. I did not install this for aerodynamic purposes. As I stated in my first post PROCTECTION OF MY LIP! So far so good :) |
i dont get why everyone is so negative about this mod. it looks pretty clean, almost like a CR front lip that has the bottom flat plastic part. ive been looking for a way to finish up my amuse front, it was always missing something to me. i was never brave enough to cut it up to make a proper splitter and adding a flat splitter on the bottom doesnt look right. this might be the perfect solution. thanks OP, just placed an order.
|
Is this any different than the garage piece that home depot sells? Because the material will start to sag and deform over time.....not to mention it will flap around at pretty much any speed.
|
Originally Posted by Shadow_S2K
(Post 21376240)
Is this any different than the garage piece that home depot sells? Because the material will start to sag and deform over time.....not to mention it will flap around at pretty much any speed.
|
this company is banking selling this at double the price! :LOL:
my "HD" lip..looks the same to me. :D https://farm5.staticflickr.com/4074/...aaf34065_b.jpg |
Just installed mine , it' looks nice overall but I want to do something to the edges. But don't kno what make it round? Also has none tried the side skirts?
|
do you have any pictures on the sides? looks great though
|
Mine is on the way. Review coming.
|
Here's a pic of the "EZ splitter" installed on my car...
http://sphotos.xx.fbcdn.net/hphotos-...55639467_n.jpg From this moment on I will be calling it a lip protector because that is what it is. Sadly, I had it on for about an hour. The front became too low because the lip protector angles downwards towards the front at a pretty aggressive angle (45+ degree slope). Rubbed on every incline I encountered within the drive. So I pulled it off. It's a decent product but just not for me. :) |
I just ordered one to protect my lip. Thanks for sharing OP!
|
here are some pic of the sides.
free car wash :) http://i43.tinypic.com/azcm1k.jpg http://i43.tinypic.com/350v021.jpg http://i41.tinypic.com/pw4ue.jpg |
Looks like they are buying parts from home depot and putting it in a new box and charging double the price. Looks 100% identical to my home depot garage lining.
|
So the ez lip doesn't work for me. I thought I would give it a try and the first day I had it on it scraped off. My pretty low so I didn't have much hope for the lip anyway just thought it would have lasted a little longer:( looked good while it later tho
|
Dead Thread I know but - Anyone still using this, or happy with it? I need to protect my perfect bumper from curbs and driveways.
Thanks |
I have it on my daily driver, it looks okay but I wouldn’t put it on my S. Plus it really isn’t that durable, mine is all ****ed up and it’s been maybe 6 months.
|
Originally Posted by JDMpearlwhyteZ
(Post 24639437)
I have it on my daily driver, it looks okay but I wouldn’t put it on my S. Plus it really isn’t that durable, mine is all ****ed up and it’s been maybe 6 months.
I’ll look into other options. Maybe a lip or ‘splitter’ - almost impossible to keep that bumper free from damage with driveways and curbs. |
Originally Posted by VFX_S2K
(Post 24639552)
Thanks for the update!
I’ll look into other options. Maybe a lip or ‘splitter’ - almost impossible to keep that bumper free from damage with driveways and curbs. |
Put something on from egay 3 or 4 yrs ago still ok, I have a rubber version ..
did not know this post existed . |
All times are GMT -8. The time now is 12:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands