Password JDM underbody aerodynamic package
Thread Starter
Registered User
Joined: Jun 2001
Posts: 7,279
Likes: 1
From: Fountain Valley, CA
Password JDM underbody aerodynamic package
ALL IN BEAUTIFUL WEIGHTLESS CARBON FIBER -$2999 for 1x1 weave
During Development...
Professional Race Team Design Engineering observing his work
GM overseeing the work
Notice the ribs, scoops and ducts to still cool the underbody components. Vacumm bagged and oven cured dry carbon pieces, no clearcoating.
Custom brackets & braces holding these three pieces together is anadozied aluminum and fitment is perfect. These braces also stiffen the chassis too, which is an added benefit.
Above is when the kit was being developed, so the finished product will vary from these development pictures. No clearcoat, on the 1x1 CF it is the epoxy they use that creates the high gloss. It should make a difference for their Super Lap Battle Time Attack car which will debut soon.
They have a Kevlar verson too, for the Rio or Spa's out there.
A lighter CF Driveshaft is next and covered up by the mid section.
Tan
During Development...
Professional Race Team Design Engineering observing his work
GM overseeing the work
Notice the ribs, scoops and ducts to still cool the underbody components. Vacumm bagged and oven cured dry carbon pieces, no clearcoating.
Custom brackets & braces holding these three pieces together is anadozied aluminum and fitment is perfect. These braces also stiffen the chassis too, which is an added benefit.
Above is when the kit was being developed, so the finished product will vary from these development pictures. No clearcoat, on the 1x1 CF it is the epoxy they use that creates the high gloss. It should make a difference for their Super Lap Battle Time Attack car which will debut soon.
They have a Kevlar verson too, for the Rio or Spa's out there.
A lighter CF Driveshaft is next and covered up by the mid section.
Tan
Registered User
Joined: Mar 2004
Posts: 9,447
Likes: 16
From: West Coast baby
Looks pretty cool Tan but damn that would make maintenance/service a PITA.....hahaha
That rear piece in Kevlar would be neat though - they have something like that for the NSX-R from Downforce.
rk
That rear piece in Kevlar would be neat though - they have something like that for the NSX-R from Downforce.
rk
Thread Starter
Registered User
Joined: Jun 2001
Posts: 7,279
Likes: 1
From: Fountain Valley, CA
Originally Posted by slightly2ned,Jun 2 2008, 08:51 AM
Very nice for the first design. Possibly in the future there can be a cut out or a door mechanisim for oil changes
Tan
Remove panels to peform oil change and not have to drip oil all over the diffuser.
Trending Topics
Thread Starter
Registered User
Joined: Jun 2001
Posts: 7,279
Likes: 1
From: Fountain Valley, CA
Originally Posted by HUYS2200,Jun 2 2008, 09:10 AM
Will this fit with my Amuse GT1 kit? 
I wonder if they can fab that rear diffuser to fit nicely with the rear bumper.
I wonder if they can fab that rear diffuser to fit nicely with the rear bumper.The Amuse widebody already comes with a rear diffuser and a front too right?
Tan