Spoon & AP2 v2 +15mm Spacers
#11
^^^The recess is not deep enough on the V2's but he said he is running them, he must have cut the studs down.
I recently went down this road with hub centric 15mm spacers, they will only work perfectly on the AP2V1 wheels without modification as the clearance is just not there on any other stock wheel.
I recently went down this road with hub centric 15mm spacers, they will only work perfectly on the AP2V1 wheels without modification as the clearance is just not there on any other stock wheel.
#12
Do you have Spoon Monoblock Calipers? Those are what I"m trying to figure out if they will fit with v2 wheels and 15mm spacers...
I am already running 15mm spacers all round on v2 wheels - I'mnot asking about spacers.
#13
I know what you’re asking and sorry for being off topic but no I don’t know. There was just a few instances of misinformation above about stud clearance. I’m following as I would also like to know about the calipers. Back on Topic.
#14
Registered User
I also have a set of spoon calipers that i bought used but in new condition but have not out them on cause i have the ap1 16s right now
#17
What brand of spacers do you run/recommend?
#18
From the research I've done, I concluded that a 15mm spacer with built in studs would work with ap2 v2. It would require shaving down the factory studs to refit the wheels. If you go with a 20mm spacer, you won't need to shave the factory studs.
#19
Fits like a glove
#20
And AP2 V1?? That's what I'm running on my AP1. I'd like 15mm if that does not force the tyres to touch the fenders. Wouldn't mind 20mm if rubbing is not an issue.