Any objective tests on cooling plates?
10-09-2008, 03:44 PM
#41
Former Sponsor
I think I will just leave it slightly rubbing then. Doesn't bother me, just makes a little mark on the cooling plate. Damage is done already so if I get a new one I will find a way to raise it up slightly.
10-09-2008, 04:34 PM
#42
"2003":
You might first try buffing out the marks with an ROB. If that works, glue a small piece of thin felt to the part of the inner hood that is rubbing. If buffing does not work, put a round piece of thin felt (from Home Depot and the like) over the scratches. It will probably look like it came that way!
You might first try buffing out the marks with an ROB. If that works, glue a small piece of thin felt to the part of the inner hood that is rubbing. If buffing does not work, put a round piece of thin felt (from Home Depot and the like) over the scratches. It will probably look like it came that way!
10-09-2008, 04:44 PM
#43
Former Sponsor
Originally Posted by dolebludger,Oct 9 2008, 08:34 PM
"2003":
You might first try buffing out the marks with an ROB. If that works, glue a small piece of thin felt to the part of the inner hood that is rubbing. If buffing does not work, put a round piece of thin felt (from Home Depot and the like) over the scratches. It will probably look like it came that way!
You might first try buffing out the marks with an ROB. If that works, glue a small piece of thin felt to the part of the inner hood that is rubbing. If buffing does not work, put a round piece of thin felt (from Home Depot and the like) over the scratches. It will probably look like it came that way!
Thread
Thread Starter
Forum
Replies
Last Post