ITB AEM V2 start up file
#1
ITB AEM V2 start up file
Hey S2KI. I am just trying to reach out to see if anyone is willing to donate a calibration file that has the V2 AEm setup for TPS vs RPM based tuning to save my starter some life trying to set it up. It would be greatly appreciated. Planning on starting the car up today and get it idling to bleed coolant, check for leaks etc. Real tune i already have scheduled at Evans on the 14th of January 2017 so im not trying to steal someones tune for free. It would just be very helpful and if anyone has something they are willing to donate i'd be grateful. If not wish me luck!
#2
Moderator
What ITBs and injectors are you running?
#3
Feezy. They are the OBX 50mm with custom machined stacks to make them shorter.
Injectors are ID 1000's That I have had
FPR is Aeromotive Compact EFR set at 50 psi
Factory TPS (machined an adaptor to use factory TPS on these throttles instead of buying the jenvey one or another TPS)
URGE Map block
OEM Map Sensor
Injectors are ID 1000's That I have had
FPR is Aeromotive Compact EFR set at 50 psi
Factory TPS (machined an adaptor to use factory TPS on these throttles instead of buying the jenvey one or another TPS)
URGE Map block
OEM Map Sensor
#4
Back fron the dead, but does anyone have a start up file that I could get?
AEM EMS v2
AEM UEGO
51mm Hayward ITB
480cc Pico injectors
Mugen header
HFC 63.5mm
Fujitsubo Legalis R exhaust
AEM EMS v2
AEM UEGO
51mm Hayward ITB
480cc Pico injectors
Mugen header
HFC 63.5mm
Fujitsubo Legalis R exhaust
Thread
Thread Starter
Forum
Replies
Last Post