AIm2kil

I just purchased a K&N FIPK intake and an Invidia N1 dual exhaust. I planed on installing them both with the help of a friend of mine. I was wondering if there was anything specific I need to look out for in the install of either. And yes I have already searched and book marked several install threads! Just nervous I guess because the friend helping me is an idiot. Thanks guys.

s2krazyyy

I have K&n intake/invidia dual and both installs are pretty straight foward no specifics you need to look out for. Very easy imo

EVAN&MONICA

April fools??

They're just bolt ons, on that note your probably better off without the help of an idiot IMO

JDMQuip

Pretty straight forward install. Try to remember where the vacuum lines go so you don't throw a CEL. Other than that should be good.

HondaNV

I had to drill a hole in mine for the air temp sensor pretty much the hardest thing for me

m02pilot

The k&N should look like this when you are done.
Just remember to put the rubber Donut through the heat sheild and not just on the air filter side.
You will be fine

superpirate

Just don't mix up the vacuum hoses on the K&N install. I almost did that. Luckily I caught it when I reread the directions. The exhaust is very easy to install so no real worries there.

Requiem

Just be ready for the unfiltered music of the F20!

Option AP2

Love that sound on mine!! Another thing u might wanna do is... make sure u don't loose any of the small numerous hoses that will come off.... you'll need em if u ever go back to stock

superpirate

^Put everything you don't need in the stock airbox and tuck it away.