Hard Dog Roll Bar Results in Tight Top
03-29-2018, 01:33 PM
#11
Registered User
Thread Starter
Join Date: Nov 2017
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Yeah I do have the single diagonal. The trimming was wine consuming but seems to be successful. I just received my door edge guard today so reassembly should start this weekend. I’ll get some more pics up soon.
04-07-2018, 04:35 PM
#14
Registered User
Thread Starter
Join Date: Nov 2017
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
No, the secret compartment isn’t going to open again. This was known and as advertised on the Hard dog site, so not a surprise. I considered removing the cover to just have it as a cubby, but didn’t want to lose the wind deflector.
04-08-2018, 01:36 PM
#15
Does yours have a harness bar? I have a feeling you're going to be buying another roll bar in the future.
04-08-2018, 01:59 PM
#16
Registered User
Thread Starter
Join Date: Nov 2017
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
I spent quite a while thinking about that. But the purpose really is street first with a few lapping events for some fun. I’ve got a few friends who race Radicals, so I would likely go that route if I’ve ever got enough time to get more serious about time at the track.
But there’s of course a chance you could end up right. If so, how difficult is it to remove the under coating spray to get the bolts out?
But there’s of course a chance you could end up right. If so, how difficult is it to remove the under coating spray to get the bolts out?
04-08-2018, 02:57 PM
#17
I spent quite a while thinking about that. But the purpose really is street first with a few lapping events for some fun. I’ve got a few friends who race Radicals, so I would likely go that route if I’ve ever got enough time to get more serious about time at the track.
But there’s of course a chance you could end up right. If so, how difficult is it to remove the under coating spray to get the bolts out?
But there’s of course a chance you could end up right. If so, how difficult is it to remove the under coating spray to get the bolts out?
I battled the same decision for months since I wanted to keep my interior. Ended up doing the full double diagonal and ditched interior. When I put the center console back in it looks just like stock unless you look close.
04-08-2018, 09:27 PM
#18
Registered User
If you do decide to go with harnesses, I've done a custom install where we tied the harness bar into the main hoop, through the secret compartment. Came out really clean.
Thread
Thread Starter
Forum
Replies
Last Post
robertbrite
S2000 Racing and Competition
8
11-14-2018 09:36 PM