Seat belt assistance, please...
#31
I tried pushing the bolster away, but it's really a tight fit. So I attached three pics showing the best images I could (Had to delete about 10 others). To the left, in all pics, is the front of the seat. To the right the rear. My OEM receiver is toward the front middle of the seat, due to using the buddy club rail attachment point. So the OEM one comes at a slight angle from the front, back toward the whole it needs the extender fed through. However, the cloth extender isn't twisted, or stressed at 180 degrees or anything that seems severe. It's more so a gradual turn after the OEM recevier, where the cloth extender feeds through the hole. It is different in that the OEM receiver comes from in front, and angles back toward the eyelet. But that's how it's set up with buddy club rails. Can't remember if that's the rail system you're using. If you have any additional questions, feel free to ask.
Last edited by Kirk180; 05-24-2017 at 12:30 PM.
Thread
Thread Starter
Forum
Replies
Last Post
lookuphere
California - Southern California S2000 Owners
15
06-07-2009 10:31 PM