Ok I have come to the conclusion that I need halfshaft spacers. I know i can get the J's for like $220.00 and then there are the motorklass ones for cheaper.

My question is what is the difference? The motorklass spacers seem a lot thinner.

And are these things pretty basic to install? Do you just take bolts out put in spacers and new bolts?


And I would like some feedback in regards to them working or not I know there is a difference of opionon, but if you have experience with these spacers please chime in.

Thanks

 

are u talkin about the spacers for the axels? if so, then u need to take the axels totally out from the rear end.

 

Really, just to put the spacers in

 

read the post from the motorklasse gb thread. it has install instructions in there. but you don't need to take the whole axle out.

 

[QUOTE=BowlofRice,Nov 14 2006, 09:11 AM] read the post from the motorklasse gb thread.

 

they will work, how thick are they? 7mm?

 

the difference is j's is a 10 mm spacer and motorklasse 7 mm spacer. how lowered are you?

 

1.5 inches

 

 

Anyone with driveshaft spacers feel free to chime in please