S2KI Honda S2000 Forums

S2KI Honda S2000 Forums (https://www.s2ki.com/forums/)
-   S2000 Talk (https://www.s2ki.com/forums/s2000-talk-1/)
-   -   Stock Dyno - 203 WHP (https://www.s2ki.com/forums/s2000-talk-1/stock-dyno-203-whp-607068/)

Teh Legacy 06-21-2008 05:20 PM

Stock Dyno - 203 WHP
 
1 Attachment(s)
I dyno'd the S2k today completely stock, and I was a bit surprised at the results. The car did 203 WHP @ 9250 RPM. I was definitely surprised it held power so well past 9000 RPM. This was at a local dyno day on a portable Dynomite Dyno. It's notorious for reading high, but it seemed a little more calibrated today. Should I be surprised by these numbers, or is this about par for the course on a stock AP1 S2000? The only modification I've done on the car is removed the intake box and installed a cone filter directly on the OEM intake tube.

Attachment 130013

Video -


http://www.youtube.com/watch?v=eYQRQiy01mg

Elistan 06-21-2008 05:28 PM

:confused:

203 hp isn't unheard of for an AP1.

10,000+ rpm is. :ponder: Looks like the dyno's tach pickup is messed up? Or have you really modified your car to rev to 10k?

Elistan 06-21-2008 05:29 PM

Another AP1 dyno:

https://www.s2ki.com/forums/index.ph...mage&img=38795

Teh Legacy 06-21-2008 05:39 PM

[QUOTE=Elistan,Jun 21 2008, 05:28 PM] :confused:

203 hp isn't unheard of for an AP1.

10,000+ rpm is.

Teh Legacy 06-21-2008 07:18 PM

Video -

http://www.youtube.com/watch?v=eYQRQiy01mg

qbmurderer13 06-21-2008 07:24 PM

So your completely stock s2k revs to 10,000 rpm....?

The dyno rpm pickup is definately messed up. 203whp is average for a stock AP1. But you do realize that the stock ecu cuts fuel at 8900rpm, although the highest rpm ive ever recorded on my VAFC2 has been 9020. Its literally impossible to rev an AP1 to 10,000 without an ecu upgrade and possibly some valvetrain work.

SCCS2K 06-21-2008 07:26 PM

what's with the low torque? 120ish maybe?

Teh Legacy 06-21-2008 07:36 PM


Originally Posted by qbmurderer13,Jun 21 2008, 07:24 PM
So your completely stock s2k revs to 10,000 rpm....?

The dyno rpm pickup is definately messed up. 203whp is average for a stock AP1. But you do realize that the stock ecu cuts fuel at 8900rpm, although the highest rpm ive ever recorded on my VAFC2 has been 9020. Its literally impossible to rev an AP1 to 10,000 without an ecu upgrade and possibly some valvetrain work.

My thoughts exactly. I knew there was something going on with the RPM pick up. I was unsure of when the AP1 actually cuts fuel, but the power band makes a lot more sense when you say fuel cut is 8900. That would put peak power around 8500, which is about right. :thumbup:

Teh Legacy 06-21-2008 07:37 PM


Originally Posted by SCCS2K,Jun 21 2008, 07:26 PM
what's with the low torque? 120ish maybe?

240 HP @ 8,300 rpm; 153 ft lb @ 7,500 rpm is stock crank numbers. I'd say 123 WTQ is right on with that.

qbmurderer13 06-21-2008 07:41 PM

Honestly the dynomite dynos are crap. I went to one a while back and I got 170whp and like 120wtq with an AFR of 17.3....

A few days later went to a dynojet and got 206whp with afr in like 10s or 11s. Go to a better dyno like dynojet or mustang.


All times are GMT -8. The time now is 03:00 PM.


© 2024 MH Sub I, LLC dba Internet Brands