Arslansmc

hey guys I'm back with the same issue I had Honda repair for me last time, 3000 miles back my fuel line that fed my motor was bent and spraying onto my motor, Honda claimed due to the ap2 swap in a ap1 chassis the fuel line was mounted wrong and got bent and cracked causing it to spray, but now after the repair 3000miles later it's doing the same thing in the same spot! Could me running a ap1 ecu and running rich cause this to continuously happen? Or is it a bad install by Honda? I really need this problem fixed my car almost caught fire twice!

Arslansmc

Here is a link to the video of the leak
https://youtu.be/tm-JXEg6ci0

dedonderosa

well the AP1 and AP2 main fuel feed lines are different, and have different part numbers

00-03 AP1 16720-PCX-003
04-05 AP2 16720-PCX-013

Arslansmc

so when Honda repairs this what fuel line is best to put on the car?

Arslansmc

I mean the motor is a ap2 and the chassis is a ap1 but why does the ap2 fuel line keep breaking?

flanders

Looks like an AP1 fuel line and that's probably why it's leaking again.
Ecu is definitely not the cause.

dedonderosa

yup order an ap2 fuel line and go from there

Arslansmc

THank out all for the help, they did put the wrong line on my car because my block was a 03 and my head was a 05 so they thought I had a ap1 even though I stated and it's on my invoice that it's a 05 so use 05 parts but they didn't so now they are repairing it for free! Thank you anyways you guys are the best for helping me figure out what went wrong so I could get my S running again

jyeung528

i felt really bad for you after hearing your exasperation in the video. lol

Arslansmc

yea I was just super pissed this kept happening and I was getting fed up debating on giving up on the car, lol. thanks for the help though!