Can someone post a pic of oem clutch stop that the clutch pedal hits when pushing down to floor? I've read only way to get it from honda is with floor pan. Thanks in advance.

 

I just looked at my 2006. Nothing I could find like this. Pedal stops on suspended pedals are typically on the brackets holding the pedals.

-- Chuck

 

Rubber stopper on floor pan where clutch hits on floor pan/firewall when fully depressed.

 

The other day while replacing dash light bulbs I took a look at the stopper and although I forgot to get a picture, it's a flat piece about 1" round and maybe 1/4" thick, that sits flush up against the firewall.

It seems to be part number 46505-SA5-000, #13 in the pedal diagram in eStore:

http://estore.honda.com/honda/parts/...++23&dl=208095

Good luck!

 

Thanks for the effort but I think that is for the clutch switch. I found something that's works well but need to verify before posting as I don't want to cause anyone issues.

 

My car was missing the stop hence why I wanted to see factory piece on someone's s2000. Everything I had a chance I'm so envolved with something else I forget about it.

 

I believe the part you are describing is the one circled in red. It doesn't appear to be part #13, which is the white stopper seen near the top of the pedal arm.

 

That's the one. What i used was a little taller. May cut it down a little. I will get pic of it later today or tomorrow as I know some people were looking for a replacement. Thanks for crawling under dash and getting pic.

 

I've ordered ever plastic bumper and pedal stop in the footwell parts diagrams, none of 'em fit. I was leaning towards putting a thin felt disc (furniture pad) over the hole, but I fear it would be too thick. Let us know what you've come up with - I need to do something with mine...

 

Yeah, #13 obviously is the little white button near the top of the pic. You could get the dashboard insulator for only $177 and have the stopper you need