jst2878

Thanks guys. Now if tireracks cargo container can get here with my re-71's

jst2878

Unfortunately, the re-71 will not be arriving on time for my dragon deoarture. I opted for the rs4's instead. Upon first touch, they are not as soft as the re71, but they are .4" wider. I needed to adjust my camber to prevent rubbing, but now my toe is out of whack. Car whobbles when i drove it, like a few lugnuts are loose. Need to adjust the rear toe so i can get it to the alignment shop. Hoping to go no more than -2.8 in the rear, we shall see. On a brighter note, these te37's are so balanced. I needed the fewest amount of weight on each rim

vvuong714

for my car, i had to run 3.3 camber in the rear. i slightly rub on really harsh roads. my spring rate is 16kg all around and i dd my car. congrats btw i have the same size wheels in bronze but running federal rsrr. i know they run a bit wider than most 255 tires. the front im running 3.5 camber on stock fenders with slight pull, nothing extreme

jst2878

You had to run -3.3 because of the tire or you didnt roll your rear fender flat

andrewhake

Wheel balance is much more due to the weight and design of the tires and how they are mounted to the wheel than the weight or design of the wheel.

vvuong714

my rears are rolled, tabs relocated and shaved bumper. it's not contacting the fender, its rubbing on the bumper because i didn't trim enough

jst2878

then the award goes to the rs4. Need to drive this thing and get a feel for these kooks

big thanks to steve aka hondabruh for providing me with his first born voltex 1s. Ill take good care of it, especially the postcard

jst2878

I adjusted the rear toe out and the car was able to be driven without skipping. Car feels great, but an alignment is overdue. After i set the rear camber i saw no signs of fender contact with the tire, nor the bumper, so thats a good camber to start with. I wanted to try the famous pose, camera sucks doe

RAizzle

Looks amazing. In for more photos

jst2878