rsdub

Got a chance of some alloys that i like.They are 8.5 x18 et40 .both the same for front and rear..w
Was going for 225 40s front and 235/245 40s rear.I am on coils so a bit of movement there.Any chance they will fit with no rub?

Andy_F

Should fit fine but in all likelihood will need a roll, shouldn't need a flare though.

rsdub

Was hoping to get away without rolling

CHIPPO

Incorrect offsets really for the best option inc 255 rears with no need to roll at all ,Enkei do the correct offsets but I can't remember what mine are something 9x17 63 rears .

rsdub

I understand the right offsets just want to know if i can get away with the offsets above

quickmoose

I run BC coils.
I'm on 8" 18's et38 at the front with 215/45 and the wheel arch liner pushed up above the wheel arch lip.
9.5" 18's et38 at the rear with 245/45 wheel arch rolled, bumper tab removed.
Hassle at the time, no regrets now though. zero rub.
Although the odd driveway or speedbump kisses the exhaust underneath....