Mark this thread as Unsold
UT: Hayward ITB'S (Feezy's old setup)
#1
Community Organizer
Thread Starter
UT: Hayward ITB'S (Feezy's old setup)
First Name: Tyler
Location: Syracuse, Utah
Contact: PM or text 801-558-1486
Price: $1300 Paypal'd and Shipped
*Will trade towards a supercharger kit. Can add URGE Designs Unicorn Header and or Gernpipe.
I have my Hayward ITB set up from my race car for sale. The mid range gain and throttle response are amazing. These bad boys sound like pissed off banshees under the hood. I always get compliments from people watching me drive by on track. I ran these with an Urge Unicorn Header, and Gern Pipe on an F20C running in the NASA TT4 class. The kit is currently still installed on the car and will be removed upon sale. They will come straight off of my running car, and if you buy the entire set up you can bolt it on to your car and start driving it right away. This is a complete plug and play setup if you purchase the kit. You do not have to cut or modify the car in any way that is not 100% reversible when installing these ITB's. I have a tune for an AEM EMS V2. I ran a Haltech unit on my car and can include the tune from that as well.
****This is going to include everything to be plug and play except an ECU or a wideband A/F gauge. The kit will include Fuel lines, AN fittings, fuel line fittings.
Hayward 50mm Individual Throttle Bodies
- Hayward Manifold
- Jenvey 50mm Throttles x4
- Jenvey Velocity Stacks x4
- Jenvey Fuel Rail
- Jenvey Throttle Linkage
- New Steel Coolant Neck Fitting
- Coolant Temperature Sensor
- OEM Throttle Position Sensor
Uni Air Filters & Springs x4
Tidus_888 Vacuum Block
- IAC & Map Sensor Provisions
- Bracket to mount the vacuum block.
RDX 410cc Fuel Injectors
Xenocron Plug & Play Clips for RDX Injectors
- Plug and play clips for OEM harness to RDX injectors
- Anodized aluminum spacers to fir the RDX injectors to the fuel rail.
Custom Fuel Line
- Custom built, extends from the chassis to the fuel rail.
Aeromotive Fuel Pressure Regulator
Fuel Pressure Gauge
Black Braided Stainless Steel Fuel Lines
Earls AN Fittings
-Anodized Black (I didn't want the multicolored fittings in my bay so all of the fittings are black.)
Here is a link to Feezy's For Sale AD:
https://www.s2ki.com/forums/member-s...-itbs-1113812/
Here is my dyno compared to a bone stock AP1 on a mustang dyno
Location: Syracuse, Utah
Contact: PM or text 801-558-1486
Price: $1300 Paypal'd and Shipped
*Will trade towards a supercharger kit. Can add URGE Designs Unicorn Header and or Gernpipe.
I have my Hayward ITB set up from my race car for sale. The mid range gain and throttle response are amazing. These bad boys sound like pissed off banshees under the hood. I always get compliments from people watching me drive by on track. I ran these with an Urge Unicorn Header, and Gern Pipe on an F20C running in the NASA TT4 class. The kit is currently still installed on the car and will be removed upon sale. They will come straight off of my running car, and if you buy the entire set up you can bolt it on to your car and start driving it right away. This is a complete plug and play setup if you purchase the kit. You do not have to cut or modify the car in any way that is not 100% reversible when installing these ITB's. I have a tune for an AEM EMS V2. I ran a Haltech unit on my car and can include the tune from that as well.
****This is going to include everything to be plug and play except an ECU or a wideband A/F gauge. The kit will include Fuel lines, AN fittings, fuel line fittings.
Hayward 50mm Individual Throttle Bodies
- Hayward Manifold
- Jenvey 50mm Throttles x4
- Jenvey Velocity Stacks x4
- Jenvey Fuel Rail
- Jenvey Throttle Linkage
- New Steel Coolant Neck Fitting
- Coolant Temperature Sensor
- OEM Throttle Position Sensor
Uni Air Filters & Springs x4
Tidus_888 Vacuum Block
- IAC & Map Sensor Provisions
- Bracket to mount the vacuum block.
RDX 410cc Fuel Injectors
Xenocron Plug & Play Clips for RDX Injectors
- Plug and play clips for OEM harness to RDX injectors
- Anodized aluminum spacers to fir the RDX injectors to the fuel rail.
Custom Fuel Line
- Custom built, extends from the chassis to the fuel rail.
Aeromotive Fuel Pressure Regulator
Fuel Pressure Gauge
Black Braided Stainless Steel Fuel Lines
Earls AN Fittings
-Anodized Black (I didn't want the multicolored fittings in my bay so all of the fittings are black.)
Here is a link to Feezy's For Sale AD:
https://www.s2ki.com/forums/member-s...-itbs-1113812/
Here is my dyno compared to a bone stock AP1 on a mustang dyno
Last edited by pastoli; 11-01-2018 at 05:13 AM. Reason: Price update
#3
Curious, I have a dbw Ap2 do you know what all would be required to run this setup? Have flashpro.
#5
Wait. So does this include?
AEM V2 EMS
- Running ITB Tune (If purchased with the ITBs)
Alloycraft EMS Bracket
- Mounts the EMS in the stock location, in the stock bolt holes.
AEM UEGO - Digital Wideband Gauge & Wideband 02 Sensor
- Black & White Faces
- Silver & Black Trim Rings
- Everything that came with the set up when purchased brand new is included.
AEM V2 EMS
- Running ITB Tune (If purchased with the ITBs)
Alloycraft EMS Bracket
- Mounts the EMS in the stock location, in the stock bolt holes.
AEM UEGO - Digital Wideband Gauge & Wideband 02 Sensor
- Black & White Faces
- Silver & Black Trim Rings
- Everything that came with the set up when purchased brand new is included.
#6
Community Organizer
Thread Starter
It does not include those items. I sold off those off. I am now running a Haltech ECU. I have a separate Haltech ECU that I can sell with this kit for extra.
Last edited by pastoli; 10-20-2018 at 07:17 PM.
Trending Topics
#10
Community Organizer
Thread Starter
The ITB's are off of the car and ready to be shipped. Shoot me an offer and let's make a deal. I will be gone for four months at the beginning of December.