CEL and VSA activation indicator
#1
CEL and VSA activation indicator
I recently bought a stock 2006 S2000 with around 70k miles and after driving for a little bit the VSA activation indicator came on and the VSA button is unresponsive. Soon after that I replaced the transmission, clutch and diff fluids. Recently when I was accelerating in 5th gear at around 6k RPM there was an immediate loss of around 1k RPM (the car was warmed up). After I slowed down I noticed that the CEL and VSA letters were lit including the VSA activation indicator from before. I finished the drive and let the car sit overnight while locating a shop to bring it in to. When I went to bring it to the shop in the morning the VSA letters were gone but the CEL and triangle were still lit. I took it to Ballade sports to run diagnostics and the car tripped the codes in the picture. They were telling me they would have to take the car apart for a couple days to get a better idea of what’s going on. I’ve been looking around on the forums and I was wondering if there was anyone who would be able to provide any insight or suggestions on what I should do. Thanks
#3
If you search on Google for 'S2KI + (your codes)' you'll find tons of threads with lots of information from people who have had the same issues.
#4
I’ve been looking around on a lot of the threads and have some ideas of what to clean/check/replace. Since I’m fresh to S2Ks I was wondering if I should let a shop with experience take it on or is this more something I could handle with a little help from some friends with S2000s
#6
I’ve been looking around on a lot of the threads and have some ideas of what to clean/check/replace. Since I’m fresh to S2Ks I was wondering if I should let a shop with experience take it on or is this more something I could handle with a little help from some friends with S2000s
Thread
Thread Starter
Forum
Replies
Last Post
Dan H
S2000 Under The Hood
11
03-21-2012 05:39 PM