I am selling a New Brembo Grand Turismo Brake Kit for all model S2k's plus H&R 15mm spacers with longer studs.

This kit is mint with not a scratch on either of the powdercoated Black calipers....i had prefit the mounts and rotors on my car and realized you need spacers to make them fit with the wheels i am running......so i will include the 15 mm H&R spacers/studs combo with the GT kit...everything included to make this kit work on your S2K.....and half the price as i have already taken a loss on this kit.....PM me if you are interested and have any questions......i will go no lower than $1,400 and that is a steal giving the retail is $2,500 + $140 for the spacers........they are also on EBAY right now with a week to sell....THANKS for the interest and good luck, BILL

 

nice price

 

its lower than what Stoptech wants new for their kit and that was one of the reasons Brembo lowered their price because so many of their buyers wouldn't fork out the 4 grand for the Brembo's when they came out.....you won't find a better buy anywhere out there on this kit......i have already taken a big loss on it....my price is way lower than what its worth

 

what is required to make these fit the stock ap2 wheel?

 

Wish I could afford to pick these up.

 

would you be willing to just sell the spacers?

 

If the brakes don't sell.....i may part out the spacers....but they were only $140 new so....i won't get much for them either way.....so i will keep them with the GT kit for now as the Calipers need more clearance for whoever buys them.

As far as the stock wheels are concerned......i sold my 17's and got 18 in Volk's before i ever test fit the Brembos.....all i can tell you is the stock wheels definitly need more offset which the spacers will give you.....and i have a ton of clearance with the 18 inch diameter with the test fit so i assume 17's will clear also....but give Brembo of N.America a call to make sure before you purchase them and learn the hard way....THANKS for the interest, BILL

 

PM sent.

 

will it clear 17" Ce28's 7.5 +43 offset?

 

the spoke design is different on the CE28's than the TE37's so that might help alittle.......i had about 3-4 mm clearance from the spokes of the TE37 once the spacers were installed and mine were +48 mm offset.....so i am guessing it would be damn close...you might want to have custom spacers made at a machine shop....there is one locally where they do that kind of work and its not that much money either