Im installing some Koni yellow shocks on the rear of my AP1 today. I have done shocks before but never adjustable ones. I'm sure Its not too complicated but was wondering if anyone has either intsalled these or if someone could point me in the direction of a thread on this? The reason being is that the shocks came with extra spacers, washers, and some other little peices of hardware, and no directions. Anyways, any help would be great. Thanks in advanced.

 

you'll need to bore out your stock pieces and take apart your stock shocks in order to swap those pieces onto the koni shocks. there's a diy thread up, after you've got everything bored out (the hardest part imo) installation is a breeze, just like any other suspension.

 

but use the search:
https://www.s2ki.com/forums/index.php?showt...=0&#entry553809

there's more out there too, there's a thread with pics as well, i just cant seem to find it right now.

 

Look in the DIY FAQ in the Under the Hood forum. There is a detailed DIY for Koni yellow install there.

 

Thanks yeah that forum is really helpful. The only thing now is Im trying to figure out the correct way (order) to reassemble the shock with the spring. Seems like I have too much hardware...