EZMotoring headlight review (with ap1 projector swap)
Thread Starter
Registered User
Joined: Oct 2007
Posts: 11
Likes: 0
EZMotoring headlight review (with ap1 projector swap)
The EZMotoring S2000 headlights are pretty good for their price. I'm going to do a write up on how the ap1 or ap2 stock projectors mount right onto the EZMotoring headlights.
Box it came in. Would rate packaging 10/10.
Headlights
After opening the headlights. I decided to swap TRS's (tsx-r lens) on to the stock projectors.
When removing the screws for the mounts, be sure to swap the stock with the EZMotoring mounts. It just screws off with pliers
EZMotoring Mount (Use screwdriver to remove)
OEM Mount (Use pliers to screw off)
Swapped Lens
The EZMotoring on top vs. the oem ap1 projector after lens swap
Done swapping. It's complete!
reinstalled
Cutoff and flicker from the projectors. I still need to seat the bulb on the projector better to get a sharper cut off, but the flicker has blue and purple in it. really nice.
Overall, I'm pretty pleased with how well these came out. An upgrade from my faded yellowed headlight lens and condensated headlights from my ap1 headlights. I would say their customer service is top notch and would really recommend these headlights. Fitment is nice too.
Customer Service- 10/10
Quality- 9/10
Fitment- 9/10
Overall look- 10/10
Box it came in. Would rate packaging 10/10.
Headlights
After opening the headlights. I decided to swap TRS's (tsx-r lens) on to the stock projectors.
When removing the screws for the mounts, be sure to swap the stock with the EZMotoring mounts. It just screws off with pliers
EZMotoring Mount (Use screwdriver to remove)
OEM Mount (Use pliers to screw off)
Swapped Lens
The EZMotoring on top vs. the oem ap1 projector after lens swap
Done swapping. It's complete!
reinstalled
Cutoff and flicker from the projectors. I still need to seat the bulb on the projector better to get a sharper cut off, but the flicker has blue and purple in it. really nice.
Overall, I'm pretty pleased with how well these came out. An upgrade from my faded yellowed headlight lens and condensated headlights from my ap1 headlights. I would say their customer service is top notch and would really recommend these headlights. Fitment is nice too.
Customer Service- 10/10
Quality- 9/10
Fitment- 9/10
Overall look- 10/10
Thread Starter
Registered User
Joined: Oct 2007
Posts: 11
Likes: 0
oh they're installed already. When I'm not busy I'll take a shot of them installed and a full on cut off picture against a wall. Keep in mind that these are still the oem ap1 projectors so don't expect that cut off with the EZMotoring projectors.
Trending Topics
Joined: Mar 2011
Posts: 327
Likes: 6
From: pa