So what did you do with them? Do you have to keep those 2 lines that run down to that air pump/solenoid/whatever it is? Or can you delete them?

 

You can only delete them if you have the air pump delete kit (or stand alone) or you'll get a cel.
izze engineering makes a great kit. I have one and i'd highly recommend it

 

You have to connect the hose after doing the coolant bypass back from the intake manifold to the engine block (located below the intake manifold).

You can delete the hose that goes to the air pump without throwing a CEL. You gotta plug your CAI pipes though.

 

I do because race car

 

Thanks guys. I hooked them back up after the install.

 

yeah do you guys have any links or pictures on how to delete unessary hoses, i want to get rid of what i can with the cai im getting tommarow

 

you can remove the whole metal tube assembly thing if you do the coolant bypass. then just buy like 6 feet of the rubber tubing to extend the vacuum lines down. i had extra but 6 feet was like 3 bucks. i remounted the air pump solenoid thing to the cross member. i can take a pic if ypu need one. on my tablet so sorry for the grammer

 

yeah that sounds great. what about that big air pump under the drivers side area of the front bumper.

and what is that lil air pump that is on the stock box for? i figured i could just mount it down there.

im looking to clean up and delete whatever i can in the bay.

 

you will need 1 foot of the bigger coolant lines to do the bypass too. i will take some pics tomorrow.

 

What, if any, are the drawbacks to this mod? And are you capping off these lines on the TB?