AlvinHuyN's Garage Sale
 

Update 6/3: [FW Single Exit Exhaust & Moddiction Polished Anvil 2]

Update 5/13: [Mint OEM 07 steering wheel + Airbag & Price drops on other items]


First Name: Alvin
Price: OBO | See below for individual pricing
Location: Santa Monica
Contact: Text 212-300-5nine79


Pictures of all items can be found here: http://www.flickr.co...57639804686195/


For Sale: AFTERMARKET

Item for Sale: Rotora BBK 13"
Price: $1100 Picked up or $1175 Shipped
Rotora 13" BBK I got in a trade but I already have a BBK. In great shape with less than 7k miles on the setup - a couple nicks on the calipers from mounting wheels but overall great condition. Comes with brackets, brake pads, calipers, 13" rotors.

Item for Sale: ForceWerkz 70mm Track Edition Single Exit exhaust<br style="font-size: 13px;">Price: $380 Picked Up
Great shape - canister painted flat black for a cleaner look (tip left polished). Comes with everything to install including gasket. On the car for less than 2k miles - this is one of the best sounding exhaust I've owned and is my second one.

Item for Sale: NEW Project Kics r40 Revo Neochrome Lug nuts (newest model)
Price: $280 picked up or $295 shipped.
Literally JUST got these but I'm running extended lugs now so I switched to something else. Brand new, never installed, and authentic.

Item for Sale: Moddiction Polished Anvil 2
Price: $60 picked up firm - great shape!

For Sale: OEM!

Item for Sale: AP2 Door Panels w/ switches
Price: $200 picked up [No Shipping this item].
Great shape out of my AP2.

Item for Sale: OEM 06-09 Steering Wheel + Airbag [28k miles on car when removed]
Price: $350 picked up or $370 shipped
Mint condition - almost flawless steering wheel and the airbag is alway flawless. I was going to use this for my CR steering wheel conversion but decided to go a different direction.

Item for Sale: OEM Roll Hoops + Plastic Covers
Price: $100 picked up or $140 shipped.
OEM Roll Hoops and plastic covers for both passenger and drivers side from MY04.

Item for Sale: AP2 Drivers Side (17k miles) Rear Knuckle Assembly.
Price: $150 picked up or $165 shipped.
I got a drivers side very low mileage rear knuckles assembly (hub, bearings, knuckles). If you need new bearings ($370 new + $450 labor) buying low mileage used knuckles is the way to go. It will require none of that taking out bearings, etc - this simply is a bolt on installation. If you're hearing noises from your wheels, it's most likely that you need new bearings. Instead of spending $400+ on new bearings and install per side, buy these and install it yourself. And yes ap2 and ap1 knuckles are different so don't mismatch them. If you have an ap1 buying ap2 knuckles will help eliminate some of the toe problems with the ap1. AP2 should not use AP1 knuckles though.

Item for Sale: Secret Compartment
Price: $10 picked up or $15 shipped
Compartment only - not the console, just the trays.

Item for Sale: Misc random OEM Parts
Price: Cheap - OBO just make an offer (shipping not listed in these prices)
-OEM washer fluid reservoir - $10
-A pillars - $20 for both


Want to Buy:

Item I want to buy: OEM Hardtop Rear Hardware
Price desired: Depends on mileage and condition.


Item I want to buy: J's / Voltex/s 195mm 225mm or 245mm wing stands
Price desired: Depends on mileage and condition.

Item I want to buy: Trunk Floor Lining (just the floor piece where the tool kit goes)
Price desired: $15

Item I want to buy: Mint Black Carpet.
Price desired: Depends on condition


Pictures of all items can be found here: http://www.flickr.co...57639804686195/


SOLD List
-Voltex Front Bumper
-Downforce +30mm Front Fenders
-Honda Ti Shift Knob
-Moddiction Shift Knob
-Karcepts Shift Knob
-AP2 Track Cutout Headlight
-Muz Floormats
-Clazzio Seat Covers
-AP2 Suspension
-Bilstein Motorsport Suspension
-Samco Intake Arm
-Advan RGIIs
-Toyo T1S
-Hardtop Strikers
-Invidia Exhaust
-Hardtop Defroster Wire
-Alpine CDE-121
-CR Suspension with Swift Spec R
-Carbign Craft CF Exhaust Heatshield
-Coast Fab custom exhaust
-Q300 Dual
-Advan RS [Traded]
-Mugen Hardtop
-Invidia Test Pipe
-Comptech Rear BBK
-OEM Ti Polish Shift KNob
-Wipers
-Black Carpet
-Eibach Rear Sway
-Alpine HD149BT
-OEM Hardtop
-J's 60 RS Titanium
-Project Kics 10mm spacers
-FW 70mm Exhaust
-CR Console
-Challenge 70TAS
-AP2 Silver Center Console
-CR Exhaust
-Berk 63mm TP
-OEM Floormats
-J's 195mm wing stands
-OEM BB Hardtop
-OEM Steering Wheel (07)
-Modifry Shifter Beeper
-Opak Titanium Strut Bar
-Berk 63mm HFC
-Carbon Mugen Top
-04 Steering Wheel
-Works Bell Rapfix II (Red)
-07 OEM Headlights
-04 Steering Wheel w/ Airbag
-AP2 Door Panels
-07 Red/Black Seats

G day, I'll take the seat covers shipped to Australia 4221 by USPS. Pay pal ready.
Cheers

Update: Karcepts Knob + Clazzio sold!

Added Authentic Mugen Hardtop! Excellent condition. Serial No. 0578 - OEM Seals and Hardware all excellent and like new.

Up! Lots of interests on the hardtop - yes it's authentic. You're more than welcome to ride passenger in my car to see that it's perfect figment. No wind noises etc.

I'm having second thoughts since Joey Jack and Edgar a told me to not trade but I've got the mod bug bad and always want to keep swapping stuff haha :)

Bilsteins traded to Pemex! Thanks bro!

Updated List to include CR Suspension w/ Swift Spec R!

:woohoo: thanks Alvin! With all the help. Car feels great... even without an alignment.

Thank YOU!

Fun day! I LOOOOOOVE the KWs! Wow I think this is the best trade day for both of us. The misses thanks you for doing this trade - she says the car is a lot more bearable through the 405 lol. I might raise the drivers rear up just a tad to be even with the passenger rear but other than that the height is peeeerfect! https://www.s2ki.com/s2000/public/st...t/thumbsup.gifhttps://www.s2ki.com/s2000/public/st...t/thumbsup.gifhttps://www.s2ki.com/s2000/public/st...t/thumbsup.gif for a good guy and my new friend!

:thumbup: the misses is happy. Best trade indeed. :LOL: