Mark this thread as Sold
FS: 2 Dual exhausts
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: SoCal
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
FS: 2 Dual exhausts
First up my custom burnt tip exhaust. 2.5" to 2.25" piping and 4" tips. It's a 3 piece exhaust. Has a 14" inch magnaflow resonator. Scraps on bottom of mufflers. I can't really compare this exhaust to another because I havn't heard many but its kind of loud? No hardware. Used for about 5k miles Asking $250
Excuse the dirty pics didn't clean it first.
Scraps
Tip
Second I have a prototype stainless steel exhaust. 2.25" inlet not sure about out but I would assume 2". Tips are 4" pointed outward. It's about as loud as a Apex-i WorldSport2. So its not too loud. Just right for street IMO. Has a 14" resonator as well. This one is a 4 piece exhaust currently bolted together gaskets and bolts still on there. Not sure if the gaskets will be good if taken apart. One side hangs about an inch too low, but WILL be solved with either a shorter hanger or have the hangers re welded. I will post pic of how I hung it which was just right. Used this one for about 1k miles so it's still relatively new.
SOLD
Notice the hanger. No re welding the hanger required if u put it through there
First with cash in hand gets it. Located in lower 714 area.
THANKS FOR LOOKING!
Excuse the dirty pics didn't clean it first.
Scraps
Tip
Second I have a prototype stainless steel exhaust. 2.25" inlet not sure about out but I would assume 2". Tips are 4" pointed outward. It's about as loud as a Apex-i WorldSport2. So its not too loud. Just right for street IMO. Has a 14" resonator as well. This one is a 4 piece exhaust currently bolted together gaskets and bolts still on there. Not sure if the gaskets will be good if taken apart. One side hangs about an inch too low, but WILL be solved with either a shorter hanger or have the hangers re welded. I will post pic of how I hung it which was just right. Used this one for about 1k miles so it's still relatively new.
SOLD
Notice the hanger. No re welding the hanger required if u put it through there
First with cash in hand gets it. Located in lower 714 area.
THANKS FOR LOOKING!