When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm looking to sell my J's Racing C/F intake. Had it on my car for about 3-4 years. Its already off the car. This is for the OEM bumper so the snorkel portion opening is much bigger and sits lower then the other version.
You will need to cut your hood to fit the snorkel portion of this intake, unless you have a hump like on the Mugen and J's racing (Type V)hoods.
Included are the brackets, nuts, and bolts that are included with the intake, and what I used to secure it. I don't have the rubber hoses, and you would either reuse your OEM one or need to get new hoses from the auto parts store. Not sure...since I had an aftermarket intake prior to my J's and had already routed the hoses accordingly.
Some Flaws:
- Oxidization on the chamber part of the intake
- Rubber below the intake filter is showing some cracks but is not an issue and cannot be seen once installed. Still fits securely onto the c/f chamber
- Some hard water spots below the intake chamber and other areas not normally seen or cleaned. But can be taken out by clay or wax if your anal (have already taken some out)
Looking for $700 obocash picked up for the intake.
J's C/F Cooling Plate $200 This is the orginal version that was then hand cut to fit the J's snorkel not the pre cut version sold from J's.
Buy both Intake and plate for $800 obo .
Feel free to PM me, all prices are OBO. Shipping is extra. Located in OC and West LA area for local pick up. More detailed pictures are available upon request. Intake and plate have been removed from the car and ready for shipping or pick up. Thanks
01-10-2010, 03:52 PM
FS: J's Racing C/F Intake & J's Cooling Plate
