Mark this thread as Sold
WTT: Dual Projector Ap1 Headlights for Ap1 stock ones
05-25-2011, 07:52 PM
#1
Registered User
Thread Starter
Join Date: Aug 2009
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
WTT: Dual Projector Ap1 Headlights for Ap1 stock ones
I want to trade my custom dual projector Ap1 headlights for an oem set of Ap1 headlights.
My headlight is originally an OEM one with the high beam removed and replaced with a bixenon (has both high and lows) halo projector. Stock projector is still there, thus making the output 4 projectors instead of the OEM 2. When the switch for parking lights is on, the parking lights and halo come on (halo wires can be detached if not wanted) and low beams all 4 will turn on. High beam will trigger the high beam in the aftermarket ones. All lights are working perfectly, but I want to try a new custom setup with Ap1 headlights and its better to work off a stock one than mine. Also I had the headlights professionally resurfaced (wet sand, coated, etc) so it's really smooth and clean now, though it wasn't hazed before, just wanted to detail them at the time. I paid about $400 for the install labor + product so I think swap +$250 obo is reasonable. No leaks as I daily the car the lights are always dry inside even in cold weather theres no build up inside.
Name: Eric
Location: Hacienda Heights or if needed, Chula Vista
what I'm trading: Custom dual projector bixenon halo Ap1 headlights with all 6k hid bulbs. Bulbs are about half a year old so will last long.
What I want: OEM Ap1 headlights with or without the amber side piece (where the turn and parking lights are) with no hazing on the plastic + $250 OBO
Contact: PM me please
My headlight is originally an OEM one with the high beam removed and replaced with a bixenon (has both high and lows) halo projector. Stock projector is still there, thus making the output 4 projectors instead of the OEM 2. When the switch for parking lights is on, the parking lights and halo come on (halo wires can be detached if not wanted) and low beams all 4 will turn on. High beam will trigger the high beam in the aftermarket ones. All lights are working perfectly, but I want to try a new custom setup with Ap1 headlights and its better to work off a stock one than mine. Also I had the headlights professionally resurfaced (wet sand, coated, etc) so it's really smooth and clean now, though it wasn't hazed before, just wanted to detail them at the time. I paid about $400 for the install labor + product so I think swap +$250 obo is reasonable. No leaks as I daily the car the lights are always dry inside even in cold weather theres no build up inside.
Name: Eric
Location: Hacienda Heights or if needed, Chula Vista
what I'm trading: Custom dual projector bixenon halo Ap1 headlights with all 6k hid bulbs. Bulbs are about half a year old so will last long.
What I want: OEM Ap1 headlights with or without the amber side piece (where the turn and parking lights are) with no hazing on the plastic + $250 OBO
Contact: PM me please
05-25-2011, 08:03 PM
#3
Registered User
Thread Starter
Join Date: Aug 2009
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
yep I'll take some output pics when I get back to SD this weekend cause the car is there for now =D. Output is basically OEM but with 6k lighting (white) and a bit more due to the extra output of the 2nd projectors.
Thread
Thread Starter
Forum
Replies
Last Post
Noodler
Socal Swap Meet
0
04-13-2013 09:32 AM